Model: STV- Bore - total stroke - pressurized trip - output
Gas pressure cylinder injection type monomers, total output of 1 ton to 20 tons before the model parameter table, the cylinder bore between 63mm-150mm, a total travel stroke may to 50-300, the operating speed can reach 700mm / s, the operating temperature control minus 5-60 degrees, the temperature of the rest of the work will need to be customized.
Description: a unitary one-piece liquid pressure cylinder pressurized cylinder, slender attractive appearance and fast, stable output.
Application: punching, demolition bending, forming, riveting, riveting and so on industry. User designed to workplace limited by the width
Unitary one-piece liquid pressure cylinder pressurized cylinder. Its characteristics are designed to be user workplace limited by the width. Beautifully slim appearance and fast, stable output. Products for punching, demolition bending, forming, riveting, riveting and so on industry. Liquid pressure cylinder is a monolithic integrated form of a cylinder with a hydraulic booster in combination, using compressed air as a power source, the size of the supercharger pressure-receiving cross-sectional area ratio of the piston, the gas pressure of the low pressure increase the number of times, the supply of hydraulic cylinders used to reach higher power cylinder.
Plus other non-tampering pressure cylinder hydraulic oil in the design chosen for the hydraulic oil VG68 # quality antiwear hydraulic oil, irrevocable unauthorized use other liquid media (e.g., oil water, etc.). Note that the maintenance, always check the operation of the boost cylinder when the supercharging pressure to avoid excessive damage your operation die or workpiece, arriving at the inlet into the installation section of a pressurized valve, in order to protect your cylinder product. To ensure the stability of the pressure cylinder, and recommends that as between the member and the triple parallel installation of a pressurized accumulator cylinder. When using a pressurized cylinder more than 500,000 times or more than six months, it is recommended cylinder hydraulic oil to replace all the time, in order to improve the life of pressurized cylinders.
Reproduced in: https: //blog.51cto.com/14316567/2402010