Problem Description:
After turning on the computer, the wireless network cannot be displayed. Open the device manager and see the driver exclamation mark. The error code is 10, as shown below.
Recommended usage:
Let's do this operation
1. Shut down
2. Please remove the external power supply, USB flash drive, mouse and other external devices on the computer.
3. Press the power button for more than 20 seconds (be sure to press for enough time before letting go)
4. Then connect the external power supply and press the power button
I suggest you try this method first after this problem occurs. Many computers have similar causes to this.
If it can't be solved, let's continue reading below. Please try with caution, because the hardware may be broken and the problem cannot be solved at the software level.
Online solution:
Method 1: Restart the driver
win+r enter the devmgmt.msc command
Open device manager
Find the network card driver with an exclamation mark and right-click it.
Select Disable Device and wait a moment for the button to change to Enable Device, so enabling it again may solve the problem.
Method 2: Update the driver
- Reinstall the driver update. Also find the network card driver, right-click and select Update Driver.
There are two options. Try the above one first. If it doesn’t fix it, try the one below.
Click below and select "Let me choose from a list of drivers available on my computer"
Then you can choose a driver and reinstall it. In short, it may be that the current driver version is not suitable. You can try an earlier version of the driver.
At this time, some of the partners' problems may be solved.
2. Uninstall device updates
Also right-click and select Uninstall Device
Click Scan to detect hardware changes and reinstall the driver.
3. Download the driver and install it
——Download 360 Driver Master or Driver Wizard to install the driver
——Get the driver installation from the official website
Method 2: Reset the network (the network card driver may not be automatically reinstalled after the reset)
netsh winsock reset
netsh int ip reset
netsh advfirewall reset
ipconfig /flushdns
ipconfig /release
ipconfig /renew
(1) Create a new text document and paste the above command
(2) Change the suffix txt to bat and save
(3) Double-click and restart after completion.
Method 3: Clean the registry
Download CCleaner to clean the registry
First "Scan for Problems" - "Fix Selected Problems"
Link: https://pan.baidu.com/s/1y1mBxo2nhJHqkWGrj9WIzw?pwd=wk3j
Extraction code: wk3j