Solution to the problem that the logging information platform diagram cannot be opened and cannot be viewed, and a script error occurs after clicking to edit a certain data table.

Tuha logging information platform appears during use------click edit-----pop-up page-------cannot open/display script error solution: as shown in the figure

Solution: 1. Set the browser IE options and select Internet options as shown in the figure:

2. In the Internet options, select Security-----Local Internet-----Site-----Advanced----- and then add the IP of the information platform to it (Note: If you are using a local website Just add the local computer IP address. If you use the company's LAN or external network, add the company's website IP. If it cannot be added, it means it has already been added, or there is an IP address you want to add in the trusted site. Please add the IP address of the trusted site. Delete it and add it to the local Internet site) as shown in the figure:

   Confirm after adding.

3. Click Custom Level under Local Internet to check whether all controls with ActiveX are enabled. If not, click Enable, as shown in the figure:

 Enable all Active controls and confirm.

4. Reset the website operating environment: please contact me (QQ: 6912083) or other administrators, or you can download the website operating environment installation package from the logging information platform for installation: as shown in the figure

Note: After clicking Run, an interface for setting IP will pop up, as shown in the figure:

Here you need to select the intranet. As before, if you are visiting a local website on-site, enter your local computer IP on the intranet. If you are accessing the company's LAN or external network, set the company's IP. Leave the external network alone. After setting, click Use. Then close IE and re-enter the problem to solve the problem