The latest edition is the 2018 edition, which has 8 sections, 126 clauses, and 120 annexes, with a total of 5600 pages and a total size of 47.3M.
10M Ethernet: Chapters 8-20
100M Ethernet: Chapters 21-33
1000M Ethernet: Chapter 34-43
10G Ethernet: Chapters 44-77
Energy Efficient Ethernet: Chapters 78-79
40G/100G Ethernet: Chapters 80-95
200G/400G Ethernet: Chapters 116-124
2.5G/5G Ethernet: Chapters 125-126
Section ONE
Contains Chapter 1~Chapter 20, Appendices A~H, and Appendix 4A.
1. Interoduction
Chapter 1: Standard Introduction
2. Media Access Control (MAC) service specification
Chapter 2: MAC Service Specification
3. Media Access Control (MAC) frame and packet specifications
Chapter 3: MAC frame and message specification
4. Media Access Control
Chapter 4: Media Access Control
5. Layer Management
Chapter 5: Interlayer Control
6. Physical Signaling (PLS) service specifications
Chapter Six: PLS Service Specifications
7. Physical Signaling (PLS) and Attachment Unit Interface (AUI) specifications
Chapter 7: PLS and AUI Specifications
8. Medium Attachment Unit and baseband medium specifications, type 10BASE5
Chapter 8: Media Connection Unit and Baseband Signal Media Specifications—Typical: 10BASE5
9. Repeater unit for 10Mb/s baseband networks
Chapter 9: 10Mb/s Baseband Network Relay Unit
10. Medium attachment unit and baseband medium specifications, type 10BASE2
Chapter 10: Media Connection Unit and Baseband Signal Media Specifications—Typical: 10BASE2
11. Broadband medium attachment unit and broadband medium specifications, type 10BROAD36
Chapter 11: Broadband Media Connection Unit and Broadband Media Specifications—Typical: 10BROAD36
12. Physical signaling, medium attachment, and baseband medium specifications, type 1BASE5
Chapter 12: Physical Signals, Media Connections, Baseband Media Specifications—Typical: 1BASE5
13. System considerations for multisegment 10 Mb/s baseband networks
Chapter 13: Thoughts on multisegment 10 Mb/s baseband network
14. Twisted-pair medium attachment unit (MAU) and baseband medium, type 10BASE-T including type 10BASE-Te
Chapter 14: Media Connected Twisted Pair Baseband Media - Typical: 10BASE-T (including 10BASE-Te)
15. Fiber optic medium and common elements of medium attachment units and star, type 10BASE-F
Chapter 15: Fiber Optic Media and Media Connected Utility Units—Typical: 10BASE-F
16. Fiber optic passive star and medium attachment unit, type 10BASE-FP
Chapter 16: Passive Optical Fiber and Media Connection Unit - Typical: 10BASE-FP
17. Fiber optic medium attachment unit, type 10BASE-FB
Chapter 17: Fiber Media Connection Unit—Typical: 10BASE-FB
18. Fiber optic medium attachment unit, type 10BASE-FL
Chapter 18: Fiber Media Connection Unit—Typical: 10BASE-FL
19. Layer Management for 10 Mb/s baseband repeaters
Chapter 19: Interlayer Management of 10 Mb/s Baseband Repeater
20. Layer Management for 10 Mb/s baseband medium attachment units
Chapter 20: Interlayer Management of 10 Mb/s Baseband Media Link Units
Section TWO
Contains Chapter 21~Chapter 33, Appendices 22A~33A.
21. Introduction to 100 Mb/s baseband networks, type 100BASE-T
Chapter 21: Introduction to 100 Mb/s Baseband Network—Typical: 100BASE-T
22. Reconciliations Sublayers (RS) and Media Independent Interface (MII)
Chapter 22: Reconciliation Sublayer (RS) and Media Independent Interface (MII)
23. Physical Coding Sublayers (PCS), Physical Medium Attachment (PMA) sublayer and baseband medium, type 100BASE-T4
Chapter 23: Physical Coding Sublayer (PCS) and Physical Medium Attachment Sublayer (PMA) and Baseband Media - Typical: 100BASE-T4
24. Physical Coding Sublayers (PCS) and Physical Medium Attachment (PMA) sublayer, type 100BASE-X
Chapter 24: Physical Coding Sublayer (PCS) and Physical Medium Attachment Sublayer (PMA) and Baseband Media - Typical: 100BASE-X
25. Physical Medium Dependent (PMD) sublayer and baseband medium, type 100BASE-TX
Chapter 25: Physical Medium Dependent Sublayer (PMD) and Baseband Media - Typical: 100BASE-TX
26. Physical Medium Dependent (PMD) sublayer and baseband medium, type 100BASE-FX
Chapter 26: Physical Medium Dependent (PMD) and Baseband Media - Typical: 100BASE-FX
27. Repeater for 100Mb/s baseband networks
Chapter 27: 100 Mb/s Baseband Network Relay Unit
28. Physical Layer link signaling for Auto-Negotiation on twisted pair
Chapter 28: Physical Layer Connection Signals for Twisted Pair Auto-Negotiation
29. System considerations for multisegment 100BASE-T networks
Chapter 29: Thoughts on 100BASE-T Network
30. Management
Chapter Thirty: Control
31. MAC Control
Chapter 31: MAC Control
32. Physical Coding Sublayer (PCS), Physical Medium Attachment (PMA) sublayer and baseband medium, type 100BASE-T2
Chapter 32: Physical Coding Sublayer (PCS) and Physical Medium Attachment Sublayer (PMA) and Baseband Media - Typical: 100BASE-T2
33. Data Terminal Equipment (DTE) Power via Media Dependent Interface (MDI)
Chapter 33: Powering Data Terminal Equipment Using Media Dependent Interface (MDI)
Section THREE
Contains Chapter 34~Chapter 43, Appendices 36A~43C.
34. Introduction to 1000Mb/s baseband network
Chapter 34: Introduction to 1000 Mb/s Baseband Network
35. Reconciliation Sublayer (RS) and Gigabit Media Independent Interface (GMII)
Chapter 35: Reconciliation Sublayer (RS) and Gigabit Medium Independent Interface (GMII)
36. Physical Coding Sublayer (PCS) and Physical Medium Atachment (PMA) sublayer, type 1000BASE-X
Chapter 36: Physical Coding Sublayer (PCS) and Physical Medium Attachment Sublayer (PMA) - Typical: 1000BASE-X
37. Auto-Negotiation function, type 1000BASE-X
Chapter 37: Auto-Negotiation Function - Typical: 1000BASE-X
38. Physical Medium Dependent (PMD) sublayer and baseband medium, type 1000BASE-LX (long wavelength laser) and 1000BASE-SX (short wavelength laser)
Chapter 38: Physical Medium Dependent Sublayer (PMD) and Baseband Media - Typical: 1000BASE-LX and 1000BASE-SX
39. Physical Medium Dependent (PMD) sublayer and baseband medium, type 1000BASE-CX (short-haul copper)
Chapter 39: Physical Medium Dependent (PMD) and Baseband Media - Typical: 1000BASE-CX
40. Physical Coding Sublayer (PCS), Physical Medium Attachment (PMA) sublayer and baseband medium, type 1000BASE-T
Chapter 40: Physical Coding Sublayer (PCS) and Physical Medium Attachment Sublayer (PMA) and Baseband Media - Typical: 1000BASE-T
41. Repeater for 1000 Mb/s baseband networks
Chapter 41: 1000 Mb/s baseband network relay unit
42. System considerations for multisegment 1000 Mb/s networks
Chapter 42: Thoughts on 1000 Mb/s Network
43. Content moved to IEEE Std 802.1AX-2008
Chapter 43: Transition to IEEE Std 802.1AX-2008
Section FOUR
Contains Chapter 44~Chapter 55, Appendices 44A~55B.
44. Introduction to 10 Gb/s baseband network
Chapter 44: Introduction to 10 Gb/s Baseband Network
45. Management Data Input/Output (MDIO) Interface
Chapter 45: Management Data Input/Output Interface (MDIO)
46. Reconciliation Sublayer (RS) and 10 Gigabit Media Independent Interface (VGMII)
Chapter 46: Coordination sublayer and 10G medium independent interface (VGMII)
47. XGMII Extender Sublayer (XGXS) and 10 Gigabit Attachment Unit Interface (XAUI)
Chapter 47: XGMII Extension Sublayer (XGXS) and 10G Media Connection Unit Interface
48. Physical Coding Sublayer (PCS) and Physical Medium Attachment (PMA) sublayer, type 10GBASE-X
Chapter 48: Physical Coding Sublayer (PCS) and Physical Medium Attachment Sublayer (PMA) - Typical: 10GBASE-X
49. Physical Coding Sublayer (PCS) for 64B/66B, type 10GBASE-R
Chapter 49: 64B/66B encoding of the physical coding sublayer (PCS) - typical: 10GBASE-R
50. WAN Interface Sublayer (WIS), type 10GBASE-W
Chapter 50: WAN Interface Sublayer (WIS) - Typical: 10GBASE-W
51. Physical Medium Attachment (PMA) sublayer, type Serial
Chapter 51: Physical Media Attachment Sublayer (PMA)
52. Physical Medium Dependent (PMD) sublayer and baseband medium, type 10GBASE-S (short wavelength serial), 10GBASE-L (long wavelength serial), and 10GBASE-E (extra long wavelength serial)
Chapter 52: Physical Media Dependent Sublayer (PMD) and Baseband Media—Typical: 10GBASE-S, 10GBASE-L, 10GBASE-E
53. Physical Medium Dependent (PMD) sublayer and baseband medium, type 10GBASE-LX
Chapter 53: Physical Medium Dependent Sublayer (PMD) and Baseband Media—Typical: 10GBASE-LX
54. Physicla Medium Dependent (PMD) sublayer and baseband medium, type 10GBASE-CX4
Chapter 54: Physical Media Dependent Sublayer (PMD) and Baseband Media—Typical: 10GBASE-CX4
55. Physical Coding Sublayer (PCS), Physical Medium Attachment (PMA) sublayer and baseband medium, type 10GBASE-T
Chapter 55: Physical Coding Sublayer (PCS), Physical Medium Attachment Sublayer (PMA) and Baseband Media—Typical: 10GBASE-T
Section FIVE
Contains Chapter 56~77, Appendices 57A~76A.
56. Introduction to Ethernet for subscriber access networks
Chapter 56: User Access Ethernet Introduction
57. Operations, Administration, and Maintenance (OAM)
Chapter 57: Operations, Administration, Maintenance (OAM)
58. Physical Medium Dependent (PMD) sublayer and medium, type 100BASE-LX10 (long wavelength) and 100BASE-BX10 (Bi-Directional long wavelength)
Chapter 58: Physical Media Dependent Sublayer (PMD) and Media - Typical 100GBASE-LX10, 100GBASE-BX10
59. Physical Medium Dependent (PMD) sublayer and medium, type 1000BASE-LX10 (long wavelength) and 1000BASE-BX10 (Bi-Directional long wavelength)
Chapter 59: Physical Media Dependent Sublayer (PMD) and Media - Typical 1000GBASE-LX10, 1000GBASE-BX10
60. Physical Medium Dependent (PMD) sublayer and medium, type 1000BASE-PX (long wavelength passive optical networks)
Chapter 60: Physical Media Dependent Sublayer (PMD) and Media - Typical 1000GBASE-PX
61. Physical Coding Sublayer (PCS), Transmission Convergence (TC) sublayer, and common specifications, type 10PASS-TS and type 2BASE-TL
Chapter 61: Physical Coding Sublayer (PCS), Transport Convergence Sublayer (TC) and General Specifications - Typical 10PASS-TS, 2BASE-TL
62. Physical Medium Attachment (PMA) and Physical Medium Dependent (PMD), type 10PASS-TS
Chapter 62: Physical Medium Attachment Sublayer (PMA) and Physical Medium Dependent Sublayer (PMD) - Typical: 10PASS-TS
63. Physical Medium Attachment (PMA) and Physical Medium Dependent (PMD), type 2BASE-TL
Chapter 63: Physical Medium Attachment Sublayer (PMA) and Physical Medium Dependent Sublayer (PMD) - Typical: 2BASE-TL
64. Multipoint MAC Control
Chapter 64: Multipoint MAC Control
65. Extensions of the Reconciliation Sublayer (RS) and Physical Coding Sublayer (PCS) / Physical Medium Attachment (PMA) for 1000BASE-X for multipoint links and forward error correction
Chapter 65: 1000BASE-X Reconciliation Sublayer (RS) Extension and Physical Coding Sublayer (PCS)/Physical Medium Attachment Sublayer (PMA) for Multipoint Connection and Forward Error Correction
66. Extensions of the 10 Gb/s Reconciliation Sublayer (RS), 100BASE-X PHY, and 1000BASE-X PHY for unidirectional transport
Chapter 66: Unidirectional 10 Gb/s Reconciliation Sublayer (RS), 100BASE-X Physical Layer, 1000BASE-X Physical Layer Extensions
67. System considerations for Ethernet subscriber access networks
Chapter 67: System Considerations for Ethernet Access Networks
68. Physical medium dependent (PMD) sublayer, type 10GBASE-LRM
Chapter 68: Physical Medium Independent Sublayer (PMD) - Typical: 10GBASE-LRM
69. Introduction to Ethernet operation over electrical backplanes
Chapter 69: Introduction to the Operation of the Ethernet Layer Backplane
70. Physical Medium Dependent sublayer and baseband medium, type 1000BASE-KX
Chapter 70: Physical Medium Dependent Sublayer (PMD) and Baseband Media—Typical: 1000BASE-KX
71. Physical Medium Dependent sublayer and baseband medium, type 10GBASE-KX4
Chapter 71: Physical Medium Dependent Sublayer (PMD) and Baseband Media—Typical: 10GBASE-KX4
72. Physical Medium Dependent sublayer and baseband medium, type 10GBASE-KR
Chapter 72: Physical Medium Dependent Sublayer (PMD) and Baseband Media—Typical: 10GBASE-KR
73. Auto-Negotiation for backplane and copper cable assembly
Chapter 73: Auto-Negotiation of Electrical Layer Backplane and Copper Cable Components
74. Forward Error Correction (FEC) sublayer for BASE-R PHYs
Chapter 74: Forward Error Correction Coding Sublayer (FEC) of the BASE-R Physical Layer
75. Physical Medium Dependent (PMD) sublayer and medium for passive optical networks, type 10GBASE-PR and10/1GBASE-PRX
Chapter 75: Physical Medium Dependent Sublayer (PMD) and Media for Passive Optical Networks—Typical: 10GBASE-PR, 10/1GBASE-PRX
76. Reconciliation Sublayer, Physical Coding Sublayer, and Physical Media Attachment for 10G-EPON
Chapter 76: Reconciliation Sublayer (RS), Physical Coding Sublayer (PCS) and Physical Medium Attachment Sublayer (PMA) of 10G-EPON
77. Multipoint MAC Control for 10G-EPON
Chapter 77: Multipoint MAC Control of 10G-EPON
Section SIX
Contains Chapter 78~Chapter 95, Appendices 83A~93A.
78. Energy-Efficient Ethernet (EEE)
Chapter 78: Energy Efficient Ethernet (EEE)
79. IEEE 802.3 Organizationally Specific Link Layer Discovery Protocol (LLDP) type, length, and value (TLV) information elements
Chapter 79: IEEE 802.3 Link Layer Discovery Protocol (LLDP) Type, Length, Value (TLV) Information Section
80. Introduction to 40 Gb/s and 100 Gb/s networks
Chapter 80: Introduction to 40 Gb/s and 100 Gb/s Networks
81. Reconciliation Sublayer (RS) and Media Independent Interface for 40 Gb/s and 100 Gb/s operation (XLGMII and CGMII)
Chapter 81: Reconciliation Sublayer (RS) and 40Gb/s, 100Gb/s Media Independent Interface (XLGMII, CGMII)
82. Physical Coding Sublayer (PCS) for 64B/66B, type 40GBASE-R and 100GBASE-R
Chapter 82: 64B/66B encoding of the physical coding sublayer (PCS) - typical: 40GBASE-R, 100GBASE-R
83. Physical Medium Attachment (PMA) sublayer, type 40GBASE-R and 100GBASE-R
Chapter 83: Physical Media Attachment Sublayer (PMA) - Typical: 40GBASE-R, 100GBASE-R
84. Physical Medium Dependent (PMD) sublayer and baseband medium, type 40GBASE-KR4
Chapter 84: Physical Medium Dependent Sublayer (PMD) and Baseband Media—Typical: 40GBASE-KR4
85. Physical Medium Dependent (PMD) sublayer and baseband medium, type 40GBASE-CR4 and 100GBASE-CR10
Chapter 85: Physical Media Dependent Sublayer (PMD) and Baseband Media—Typical: 40GBASE-CR4, 100GBASE-CR10
86. Physical Medium Dependent (PMD) sublayer and medium, type 40GBASE-SR4 and 100GBASE-SR10
Chapter 86: Physical Media Dependent Sublayer (PMD) and Baseband Media—Typical: 40GBASE-SR4, 100GBASE-SR10
87. Physical Medium Dependent (PMD) sublayer and medium, type 40GBASE-LR4 and 40GBASE-ER4
Chapter 87: Physical Media Dependent Sublayer (PMD) and Baseband Media—Typical: 40GBASE-LR4, 40GBASE-ER4
88. Physical Medium Dependent (PMD) sublayer and medium, type 100GBASE-LR4 and 100GBASE-ER4
Chapter 88: Physical Media Dependent Sublayer (PMD) and Baseband Media—Typical: 100GBASE-LR4, 100GBASE-ER4
89. Physical Medium Dependent (PMD) sublayer and medium, type 40GBASE-FR
Chapter 89: Physical Medium Dependent Sublayer (PMD) and Baseband Media—Typical: 40GBASE-FR
90. Ethernet support for time synchronization protocols
Chapter 90: Ethernet Support for Event Synchronization Protocol
91. Reed-Solomon Forward Error Correvtion (RS-FEC) sublayer for 100GBASE-R PHYs
Chapter 91: RS Forward Error Correction Sublayer (RS-FEC) in the 100GBASE-R Physical Layer
92. Physical Medium Dependent (PMD) sublayer and baseband medium, type 100GBASE-CR4
Chapter 92: Physical Medium Dependent Sublayer (PMD) and Baseband Media—Typical: 100GBASE-CR4
93. Physical Medium Dependent (PMD) sublayer and baseband medium, type 100GBASE-KR4
Chapter 93: Physical Medium Dependent Sublayer (PMD) and Baseband Media—Typical: 100GBASE-KR4
94. Physical Medium Attachment (PMA) sublayer, Physical Medium Dependent (PMD) sublayer, and baseband medium, type 100GBASE-KP4
Chapter 94: Physical Medium Attachment (PMA), Physical Medium Dependent (PMD) and Baseband Media—Typical: 100GBASE-KP4
95. Physicla Medium Dependent (PMD) sublayer and medium, type 100GBASE-SR4
Chapter 95: Physical Medium Dependent Sublayer (PMD) and Baseband Media—Typical: 100GBASE-SR4
Section SEVEN
Contains Chapter 96~115, Appendices 97A~115A.
96. Physical Coding Sublayer (PCS), Physical Medium Attachment (PMA) sublayer and baseband medium, type 100BASE-T1
Chapter 96: Physical Coding Sublayer (PCS), Physical Medium Attachment Sublayer (PMA) and Baseband Media—Typical: 100BASE-T1
97. Physical Coding Sublayer (PCS), Physical Medium Attachment (PMA) sublayer and baseband medium, type 1000BASE-T1
Chapter 97: Physical Coding Sublayer (PCS), Physical Medium Attachment Sublayer (PMA) and Baseband Media—Typical: 1000BASE-T1
98. Auto-Negotiation for single differential-pair media
Chapter 98: Auto-negotiation of unipolar differential media
99. MAC Merge sublayer
Chapter 99: MAC Fusion Sublayer
100. Physical Medium Dependent (PMD) sublayer, and medium for coaxial distribution networks, type 10GPASS-XR
Chapter 100: Physical Medium Dependent Sublayer (PMD), Distributed Network over Coaxial Cable Media—Typical: 10GPASS-XR
101. Reconciliation Sublayer, Physical Coding Sublayer, and Physical Media Attachment for EPoC
Chapter 101: Reconciliation Sublayer (RS), Physical Coding Sublayer (PCS) and Physical Media Connection of EPoC
102. EPoC PHY Link
Chapter 102: EPoC Physical Layer Link
103. Multipoint MAC Control for EPoC
Chapter 103: Multipoint MAC Control of EPoC
104. Power over Data Lines (PoDL) of Single Balanced Twisted-Pair Ethernet
Chapter 104: Single Balanced Twisted Pair Ethernet Data Line Power Supply
105. Introduction to 25 Gb/s networks
Chapter 105: Introduction to 25 Gb/s Networks
106. Reconciliation Sublayer (RS) and Media Independent Interface (25GMII) for 25 Gb/s operation
Chapter 106: Reconciliation Sublayer (RS) and 25 Gb/s Media Independent Interface (25GMII)
107. Physical Coding Sublayer (PCS) for 64B/66B, type 25GBASE-R
Chapter 107: 64B/66B encoding of the physical coding sublayer (PCS) - typical: 25GBASE-R
108. Reed-Solomon Forward Error Correction (RS-FEC) sublayer for 25GBASE-R PHYs
Chapter 108: RS Forward Error Correction Sublayer (RS-FEC) in the 25GBASE-R Physical Layer
109. Physical Medium Attachment (PMA) sublayer, type 25GBASE-R
Chapter 109: Physical Media Attachment Sublayer (PMA) - Typical: 25GBASE-R
110. Physical Medium Dependent (PMD) sublayer and baseband medium, type 25GBASE-CR and 25GBASE-CR-S
Chapter 110: Physical Media Dependent Sublayer (PMD) and Baseband Media—Typical: 25GBASE-CR, 25GBASE-CR-S
111. Physical Medium Dependent (PMD) sublayer and baseband medium, type 25GBASE-KR and 25GBASE-KR-S
Chapter 111: Physical Media Dependent Sublayer (PMD) and Baseband Media—Typical: 25GBASE-KR, 25GBASE-KR-S
112. Physical Medium Dependent (PMD) sublayer and medium, type 25GBASE-SR
Chapter 112: Physical Medium Dependent Sublayer (PMD) and Baseband Media—Typical: 25GBASE-SR
113. Physical Coding Sublayer (PCS), Physical Medium Attachment (PMA) sublayer, and baseband medium, type 25GBASE-T and 40GBASE-T
Chapter 113: Physical Coding Sublayer (PCS), Physical Medium Attachment Sublayer (PMA) and Baseband Media—Typical: 25GBASE-T, 40GBASE-T
114. Physical Medium Dependent (PMD) sublayer and medium, type 25GBASE-LR and 25GBASE-ER
Chapter 114: Physical Media Dependent Sublayer (PMD) and Baseband Media—Typical: 25GBASE-LR, 25GBASE-ER
115. Physical Coding Sublayer (PCS), Physical Medium Attachment (PMA) sublayer, and Physical Medium Dependent(PMD) sublayer, types 1000BASE-RHA, 1000BASE-RHB, and 1000BASE-RHC
Chapter 115: Physical Coding Sublayer (PCS), Physical Medium Attachment Sublayer (PMA), Physical Medium Dependent Sublayer (PMD) - Typical: 1000BASE-RHA, 1000BASE-RHB, 1000BASE-RHC
Section EIGHT
Contains Chapter 116 ~ Chapter 126, Appendices 119A ~ 120E.
116. Introduction to 200 Gb/s and 400 Gb/s networks
Chapter 116: Introduction to 200 Gb/s and 400 Gb/s Networks
117. Reconciliation Sublayer (RS) and Media Independent Interface for 200 Gb/s and 400 Gb/s operation (200GMII and 400GMII)
Chapter 117: Reconciliation Sublayer (RS) and Media Independent Interface (200GMII, 400GMII) of 200 Gb/s and 400 Gb/s Networks
118. 200GMII Extender, 400GMII Extender, 200GMII Extender Sublayer (200GXS), and 400GMII Extender Sublayer (400GXS)
Chapter 118: 200GMII Extender, 400GMII Extender, 200GMII Extended Sublayer (200GXS), 400GMII Extended Sublayer (400GXS)
119. Physical Coding Sublayer (PCS) for 64B/66B, type 200GBASE-R and 400GBASE-R
Chapter 119: 64B/66B encoding of the physical coding sublayer (PCS) - typical: 200GBASE-R, 400GBASE-R
120. Physical Medium Attachment (PMA) sublayer, type 200GBASE-R and 400GBASE-R
Chapter 120: Physical Media Attachment Sublayer (PMA) - Typical: 200GBASE-R, 400GBASE-R
121. Physical Medium Dependent (PMD) sublayer and medium, type 200GBASE-DR4
Chapter 121: Physical Media Dependent Sublayer (PMD) and Physical Media—Typical: 200GBASE-DR4
122. Physical Medium Dependent (PMD) sublayer and medium, type 200GBASE-FR4, 200GBASE-LR4, 400GBASE-FR8, and 400GBASE-LR8
Chapter 122: Physical Media Dependent Sublayer (PMD) and Physical Media—Typical: 200GBASE-FR4, 200GBASE-LR4, 400GBASE-FR8, 400GBASE-LR8
123. Physical Medium Dependent (PMD) sublayer and medium, type 400GBASE-SR16
Chapter 123: Physical Media Dependent Sublayer (PMD) and Physical Media—Typical: 400GBASE-SR16
124. Physical Medium Dependent (PMD) sublayer and medium, type 400GBASE-DR4
Chapter 124: Physical Media Dependent Sublayer (PMD) and Physical Media—Typical: 400GBASE-DR4
125. Introduction to 2.5 Gb/s and 5 Gb/s networks
Chapter 125: Introduction to 2.5 Gb/s and 5 Gb/s Networks
126. Physical Coding Sublayer (PCS), Physical Medium Attachment (PMA) sublayer, and baseband medium, type 2.5GBASE-T and 5GBASE-T
Chapter 126: Physical Coding Sublayer (PCS), Physical Medium Attachment Sublayer (PMA) and Physical Medium—Typical: 2.5GBASE-T, 5GBASE-T