Because the iPhone memory is insufficient and has not been cleaned up in time, any software crashes when opening. At this time, many friends will restart the phone to solve the crash problem, but there will be a white apple problem, which cannot enter the phone system normally and perform any operations.
The problem of insufficient memory leading to iPhone white apples is very common, and it can be said to be one of the most common faults of Apple .
White apple, generally refers to the iOS system device has software and hardware failures, stuck on a startup screen similar to Apple (due to the different colors of the iPhone, there are two situations: black apple on white background or white apple on black background), unable to enter the mobile phone system normally , to achieve a state of any operation.
What should I do if the iPhone cannot be started due to insufficient memory on the iPhone? How to fix white apples? According to its particularity, you can try these two methods, and the second method has a higher repair success rate!
Method 1: Force restart
When the iPhone encounters a black screen, white apple, automatic restart, crash, etc., it will generally try to force restart first. If the normal boot cannot be restored, another method can be adopted.
Different phone models choose different forced restart operations:
Full-screen models (iPhone8 and later): Quickly press the volume up and down keys respectively, and then keep pressing the power button until the Apple logo appears after the iPhone black screen, then release the buttons;
iPhone7, iPhone7Plus, etc.: Press and hold the top (or side) button and the volume down button at the same time until the Apple logo appears after the iPhone black screen, then release the button;
Models with a Home button (before iPhone7): Press and hold the Home button and the Power button at the same time until the Apple logo appears after the iPhone black screen, then release the buttons.
Method 2: Use professional repair tools
Use professional tools to repair white apples, such as Niu Xuechang iPhone Repair Tool , which not only supports repairing black/white apples, but also supports repairing more than 150 iOS system problems , such as black screen, black screen spinning, stuck in recovery mode, device infinite loop restart, etc.
Operation guide:
Step 1: Start Niu Xuechang's Apple mobile phone repair tool, connect the device to the computer through a data cable, and click "Fix iOS System Problems" directly .
You can choose "Standard Repair" first , without losing device data, and "Deep Repair" has a high repair success rate , but it will clear device data!
Step 2: After clicking "Standard Repair" , put the iPhone into recovery mode or DFU mode according to the software interface prompts .
For iPhone white apples caused by insufficient memory, it is recommended to put the device into DFU mode to ensure a higher success rate of data recovery!
Step 3: After the software recognizes the device, click "Download Firmware" and start repairing after the firmware download is complete. The whole repair process takes about 10 minutes, be careful not to disconnect the data cable, just wait for the display "repair complete".
Step 4: iOS system repaired successfully. If the device is still in the white apple state and cannot be turned on normally, you can perform standard repairs after entering DFU mode several times .
Or directly carry out "deep repair", which will save the iPhone white apple problem by completely clearing the device data!
Whether it is an iPhone or an ipad, if you encounter the problem of insufficient memory, you must clean it up in time, otherwise it will cause insufficient memory and a white apple failure!