Film and television post-production PR effect window

Effect window:

1. It will appear after clicking the effect
2. Acceleration button
3. 32-bit color
4. YUV effect
5. There are transition presets, color correction, audio, etc., similar to AE
6. Audio transitions are generally faded exponentially
7. The preset can be installed by itself, if it is installed by itself, it will be marked with an asterisk on its folder

Understanding video transition effects:

1. The transition needs to be placed in the middle of the materials at both ends, so that the transition will be formed
2. If you want to modify the transition time, double-click the effect in the middle of the two clips, you can set the duration of the transition, or directly drag the effect on the clip

Video transition error solution:

Insufficient media, this transition will contain duplicate frames - needs to be cropped

When the transition effect can only be applied to one piece of material - create a new adjustment layer and place it between the two pieces of material

Audio transitions:

1. Constant power (two sounds will be mixed)
2. Constant gain (about the same as power)
3. Exponential fading (sound volume changes, in addition to transitions, can also be added directly at the end of the film, so that there is a fade-out effect)

Vertical Flip, Horizontal Flip:

1. In the transformation of the video effect

Feather edges, crop, automatically reframe:

1. Feathering the edge is just to feather the edge, generally it has little effect, and it can be done in the mask
2. Cropping can crop the screen
3. Automatically recompose the picture, for example, if a horizontal screen video is put into the vertical screen, automatic recomposition can be used

Image controls (gamma correction, color balance, black and white):

1. Gamma is to adjust the gray scale, but it is redundant. Generally, it is adjusted in color
2. Color balance, there will be three colors of red, green, and blue. When a certain color is missing, or a certain color is not prominent, you can add it manually, but you can also operate it in the color palette, and black and white will be converted to black and white
3. These are rarely used, generally adjusted in the color panel

Color replacement, color filtering:

1. Color replacement, you can change the target color to the replacement color, you can use the color picker to operate, if there are white edges in different colors, you can increase the similarity a little
2. Color filtering, if you drag it in directly, all colors will be filtered out, leaving only black and white, after selecting a color, only the selected color will be filtered out
3. Materials with more complex colors are more difficult to use

Offset:

1. Giving cheapness to material in warp
2. There are two properties, shift the center to and blend with the original image
3. Shift the center to, you can adjust up, down, left, and right
4. Blending with the original image, that is, the superposition of the front and rear images

Warp Stabilizer:

1. This method can be used when there is slight shaking due to hand shaking when shooting, similar to AE

transform:

1. Shutter angle can be blurred
2. Use adjustment layers to add effects uniformly instead of adding effects to each material

enlarge:

1. The shape is generally round
2. Link can choose None

Twist option:

1. use less
2. The angle can distort the picture
3. The twist radius is equivalent to the size
4. Rotation twist center is basis point

Wave deformation:

1. Waveform type can be selected
2. Phase is equivalent to an offset

Turbulent Displacement:

1. It's a bit like water flow, but it's actually similar to wave deformation
2. You can choose turbulence, protrusion, flow
3. There are counts, sizes, offsets, complexity, etc.

Mirror image, lens twist:

1. Mirroring can directly map a picture from a picture, but it is flipped
2. When using mirroring, it is generally used on adjustment layers
3. The mirror image can only be clearly distinguished, you can use feathering,
4. Lens Distortion Is Not Commonly Used

Median:

1. The attribute has only one radius. When the radius is enlarged, it will become a blur similar to blur. There is a difference, and it is more like a melting feeling.
2. Can be used with Gaussian blur and cropping to remove watermarks

Variegated:

1. Divided into five effects, noise, noise alpha, noise HLS, noise HLS automatic, dust and scratches (when the threshold is 1, the operation has no effect)
2. HLS has hue, brightness, saturation, and phase parts