Case: What to do if Windows cannot complete formatting
[Because my U disk has been used for a long time, many files are unnecessary. I want to format it, but after inserting it into the computer, Windows cannot complete the format at all. Why? What should I do? Ask for an answer! 】
Recently, I have seen many friends say that when formatting SD cards, U disks or mobile hard disks, it is always easy for Windows to fail to complete the formatting. Why? How should we solve the situation that cannot be formatted?
Here the editor summarizes 3 super easy-to-use methods to easily solve the problem that cannot be formatted!
1. What should I do if Windows cannot complete the formatting?
If we want to format some drives, but the computer blocks the process while formatting. What should I do if Windows cannot be formatted? Try the 3 methods below!
Method 1: Format with Disk Manager
Disk Manager is a disk partition and management tool that comes with the Windows operating system. If you are unable to format the USB drive or SD card, follow the steps below to use Disk Manager:
1. Press [win+r] to open the run dialog box;
2. Enter [diskmgmt.msc] and press the [Enter] key to open the Disk Manager;
3. Find your U disk or SD card in Disk Manager, right-click it and select [Format] ;
4. Select the correct file system (such as NTFS, FAT32) and partition size in the format window ;
5. Click the [Start] button to start the formatting process.
Method 2: Use Command Prompt to complete the formatting operation
When encountering the failure of windows formatting, we can try to use the command prompt to perform formatting operations. Here's how to do it:
1. Press [Win+r] to open the run dialog box;
2. Enter [cmd] and press Enter to open the command prompt ;
3. Enter [diskpart] and press Enter to open the disk partition tool ;
4. Enter [list disk] and press Enter to list all available disks ;
5. Enter [select disk X] (where X is the number of the disk you want to format) and press Enter to select the disk to format ;
6. Type 【clean】 and press Enter to clear all data on the selected disk ;
7. Enter [create partition primary] and press Enter to create a new partition ;
8. Type 【format fs=ntfs quick】 (or select the file system you need) and press Enter to start the quick format process.
Tips: Using the command line to perform formatting operations is more suitable for friends who have a certain computer foundation. If you are not familiar with computer operations, this method is not recommended.
Method 3: Check if the drive is faulty
If you have tried the above methods but still cannot complete the format, it may be because the USB flash drive or SD card itself is faulty. You can try to check the status of the drive using the Disk Check tool that comes with Windows . Here are the steps on how to use the Disk Check tool:
1. Open [This PC] , right-click the drive to be checked, and select [Properties] ;
2. Click the [Tools] tab, and then click the [Check] button;
3. Click the [Start] button and wait for the check and repair process to complete.
Tip: If the drive is faulty, you may need to replace it or seek professional data recovery services.
2. What should I do if the data is lost during formatting?
The above 3 methods can effectively solve the problem that Windows cannot complete formatting. Once we format the drive, all files will disappear. What should I do if I accidentally delete important data or files during formatting? We can use professional data recovery software.
Through its powerful scanning and recovery functions, there is a high probability of helping us retrieve lost data. The software supports various types of data recovery and can meet the data recovery needs of most users. The specific operations are as follows:
Operating environment:
Demonstration model: Lenovo Ideapad 700-15ISK-ISE
System version: Windows 10
1. Install professional software, select the type of lost data (preferably select all), check the drive to be scanned , and click [Scan] ;
2. Wait for the first scan to end, select the file type to be viewed, and then select the file to be restored on the right side of the interface. At this time, the number of scanned files is small, and click [Deep Scan] ;
3. After the deep scan is over, select all the files to be restored, click [Recover] and select the location to save the files.
Note: Data recovery takes time, depending on the amount of data recovered and your computer's performance. Also, whenever possible, use data recovery software as soon as possible after data loss to maximize the success rate of data recovery.
Summarize
Whether using Disk Manager, Command Prompt, or Checking the Drive, you can try to fix Windows unable to complete formatting. If you accidentally delete your files or data, you can use the above software to restore them!
Past recommendations:
https://blog.csdn.net/datarecover/article/details/130523933