[Intranet penetration] Use Haproxy reverse proxy to build an enterprise private cloud: Shenzhuo Internet Tutorial

Shenzhuo Internet is a powerful intranet penetration tool that can help enterprises build private clouds and realize remote access to internal resources. In the process of building a private cloud, using HAProxy reverse proxy can improve the performance and reliability of the system. This article will introduce how to use Shenzhuo Internet and HAProxy reverse proxy to build a private cloud.

Proceed as follows:

Step 1: Install HAProxy

1. Install HAProxy on the server. For specific installation methods, please refer to the official HAProxy documentation.

2. After the installation is complete, start the HAProxy service.

Step 2: Configure HAProxy reverse proxy

At this point, the construction of the private cloud is completed. Now, you can access the internal resources of the private cloud through the external access address provided by Shenzhuo Internet.

Summarize:

This article introduces how to use Shenzhuo Internet and HAProxy reverse proxy to build a private cloud. HAProxy reverse proxy can improve the performance and reliability of the system. At the same time, using Shenzhuo Internet can achieve intranet penetration, so that external users can also access the internal resource.

1. Open the HAProxy configuration file (usually in /etc/haproxy/haproxy.cfg), add the following:

   frontend http-in
       bind *:80
       default_backend servers
   
   backend servers
       server server1 127.0.0.1:8080
   

   Among them, the frontend part defines the listening port and the default backend service, and the backend part specifies the address and port of the backend service.

2. Save the configuration file and restart the HAProxy service.

3. Step 3: Use Shenzhuo Internet to achieve intranet penetration

4. Register an account on Shenzhuohl official website ( https://www.shenzhuohl.com) and log in.

5. Create a new service in the console and select the "TCP Proxy" type.

6. Configure TCP proxy rules to map the external access port (such as 80) to the internal server port (such as 8080).

7. Save the configuration and start the service.