I believe that many friends will have certain requirements for the resolution of the computer when using the computer. Normally, they will adjust the resolution to the most comfortable state for them. However, some netizens have recently reported that their computer screen resolution If the rate cannot be changed, what should we do at this time? Let me tell you the solution if the resolution cannot be changed!
Three ways to adjust the resolution:
method one:
Right-click an empty space on the desktop, select "Properties", click "Settings", there is a "Screen Resolution" in the lower left of the window of the Settings tab, you can change the screen resolution by dragging the control block left and right (Note: each time When dragging, pay attention to the number display below), after confirming a certain resolution value, click "OK".
Method Two:
Intel graphics card - right-click on the blank space on the desktop, select Display Mode - True Color - Resolution Value (Note: Select here as needed, but it is recommended not to be too high).
Method three:
Intel graphics card - right click on the blank space of the desktop, select "Properties", click "Settings", there is an Advanced - Adapter - All Modes in the lower right of the window of the Settings tab, select a suitable mode combination (Note: Be careful not to select too high refresh rate hertz).
How can I fix the resolution cannot be adjusted?
Under normal circumstances, the screen resolution of the computer can be adjusted, and there will be at least two or three adjustment spaces. If it can't be adjusted, most of it is a problem with the graphics card driver, or it is in safe mode.
1. In safe mode
1. If it is in safe mode, you can choose to restart, press F8 to select "Last Known Good Configuration", and enter the normal desktop;
2. If it is a normal startup, you can consider whether the graphics card driver is faulty. You can right-click on "My Computer" - Properties - Hardware - Device Manager and check whether there is an exclamation mark or question mark before the graphics card item to determine whether it is a graphics card. Driver problem, if so, reinstall the graphics card driver;
2. What should I do if the computer goes black when the resolution is adjusted?
When adjusting the resolution, the black screen is often caused by the combination of high resolution and high refresh rate. For example, the display mode of 1024*768 75HZ is normal, but 1280*960 75HZ may cause a black screen. At this time, you need to restart the computer, press F8 to select "Last Known Good Configuration", or start a safe mode (press F8 to enter safe mode) to automatically repair it, and then restart.
The above is about the problem of "resolution cannot be adjusted". The editor also told you how much the computer's resolution should be adjusted to the most appropriate. Not all computers have the largest screen resolution to be the best. Specifically, you can read the article on the most suitable computer resolution.