Install CentOS6.5 using VMware virtual machine
1. Configure a virtual environment for the system (preparation stage)
1. File --> New Virtual Machine
2. Here we need to select Custom, the next step
3. Continue to the next step, enter this interface, we select "Install the operating system later". Next step
(The reason is that we are only assigning a virtual environment to the virtual machine, and the image file can be selected last)
4. Here you need to choose the system type, you should choose Linux, and CentOS64 or CentOS according to your own decision (64-bit and 32-bit)
5. Name the virtual system and the storage location of the virtual machine (the location can be changed, just like the installation path assigned by the installation software to the software)
6. No need to change, one is enough, the next step
7. Allocate virtual memory. If the memory is less than 8G, you can choose 1G. If the memory is larger than 8G, you can choose 2G.
(The larger the allocated memory, the smoother the system will run in the virtual machine)
8, network settings, select the second
9. Go to the next step, come to the allocated disk size, 20G is enough, select "Save virtual disk as a single file"
10. Next, Next, click Finish. The configuration of the virtual environment for the system has been completed.
2. Install CentOS
1. Right-click the virtual machine you just created and click Settings. Select CD/DVD-->Use ISO image file-->Browse-->Find the downloaded CentOS6.5 image file
Sure.
2. Click to start this virtual machine
Interface description:
Install or upgrade an existing system
install system with basic video driver install system with basic video driver
Rescue installed system Enter system repair mode
Boot from local drive Exit the installation and boot from the hard disk
Memory test memory test
Select the first item here, install or upgrade the existing system, and press Enter.
3. Enter the disk check, select Skip, and press Enter.
4. Only OK
5. Only Next
6. Select Chinese, next
7. Select American English for the keyboard, the next step
8. Basic storage, the next step
9. Yes, ignore all data
10. Change the host name to admin, the next step
11. Time to choose Asia/Shanghai, the next step
12. The root password is set, which is also a super administrator. The user name is root, and the general password is set to rootroot
13. The password is not secure enough, choose to use it anyway
14. Select to use all space, the next step
15. Select "Write this repair to disk"
16. Desktop desktop version
Minimal mini version (less software than the desktop version)
Basic Server Basic Edition (pure dos interface, no graphical interface)
Novices are recommended to choose to install the Desktop desktop version, which has a graphical interface. Next step
17. Start the installation. After installing the software, click to restart the system, and the installation of the CentOS system is completed.
18. After restarting, set the user name and password. Just like installing the Windows system, you need to set some things.
Remember the username and password here, and you will use this username and password to log in to the system later.
3. Configure the network so that the CentOS system in the virtual machine can be connected to the network.
1. Use the username and password to log in to the system.
2. Click the computer icon-->VPN connection-->Configure VPN.
3. Select the network card and click Edit
4. Check the automatic connection
5. Click IPv4 Settings-->Method to Automatic-->Apply.
6. After setting, wait for a while to be able to access the Internet, open the web page and try it. Note: It is best to connect the computer to the Internet through the network cable, or to connect to the wireless Internet.
