The first test of subject three is the lighting test. Many people think it is very simple, but it is easy to take it lightly, which leads to failure. There are lighting tests for the night test, mainly for overtaking, foggy days, meeting cars, and what lighting to use when passing intersections. Here is a summary. The next subject three lighting simulation test formulas and skills will help everyone to pass the test.
Subject three lighting test formulas
(1) Driving at night without street lights and poor lighting conditions; (headlights)
(2) Meeting with non-motorized vehicles on narrow roads at night; (low beam)
(3) Follow the car at close distance in the same direction at night; (low beam)
(4) Meeting with motor vehicles at night (low beam)
(5) Passing through arch bridges and pedestrian crossings at night; (alternating between far and near lights)
(6) Passing sharp bends and slopes at night; (alternating between near and far beams)
(7) Passing through intersections without traffic lights at night; (alternating between far and near lights)
(8) A breakdown occurs on the road at night, hindering traffic and making it difficult to move. (width light, hazard warning light)
(9) Driving in fog (fog lights, hazard warning lights)
Subject 3 Lighting Exam Skills
1. During the exam, the passwords are all the above combinations. After remembering this, listening to the passwords to practice is very effective.
2. The third voice prompt is separate. For example, during the test, the voice prompt may be passing through arch bridges and crosswalks at night; passing sharp bends and slopes at night; passing intersections without traffic lights at night. In all three cases, the high and low beams should be used alternately (dimming more than twice).
3. During the test, if there is a voice prompt for the use of lights, the operation must be completed within 5 seconds after the end of the voice prompt.