Photoshop realistic ~ camera lens
In the picture below: the left is an original image downloaded from Jingdong, and the right is the rendering I made. ( There are some differences from the original image )
Below are the main techniques that will be produced:
Download an original picture of a camera from a cat or a certain Dong ( I will not introduce more here, solve it by yourself, or copy the picture directly ) Note: try to find high-definition pictures
- Next enter the topic
(1) Import the picture into PS, Ctrl+A, Ctrl+C, Ctrl+N, and make the same proportional size in the early stage. ( You can change the ratio by yourself after the ability is improved in the later stage );
(2) According to personal habits, you can set double horizontal or vertical under the window menu, which is convenient for drawing (the strong ability can be ignored );
(3) Analyze the image (respectively from three aspects: lighting angle, lens structure, difficulty and Chengdu)
The lighting angle is about 120~150 degrees, (then I take 120 degrees here) the later inner shadow, bevel relief, and gradient are basically drawn according to this angle;
(4) After determining the highlights, directly start to spend the largest background color circle. Color is gradient
The light value is: #30353b;
The dark value is: #090a0b;
（5）
Next is the upper and lower parts of the opposite sex
Four shape layers, in the order shown above:
After drawing, Ctrl+E merge the four layers;
Select the black circle of layer 2 and subtract the top layer;
Select the red circle of layer 3 to intersect the shape area;
Select the two small red circles of layer 4 and set them to minus top layer again;
The alien structure is drawn.
After drawing the upper part of the structure, directly point it at the center of the circle and flip it vertically to make the following special-shaped structure.
Gradient color is directly drawn from the material, the gradient angle is set to 0 or 180, and the bevel relief effect is set
The following picture is for reference only: the specific value, it is best to adjust it yourself (because the windows computer has colors, everyone knows it)
（6）
Next is the inner circle of the second layer. The color is a gradient drawn directly from the material, and the bevel relief is also set. For the specific value, please refer to the figure below.
（7）
Next is the perspective effect of the inner circle of the second layer. The fastest way is to use the method of tangent to the two circles;
The effect is as follows
There is not much to introduce here, I have said it before.
(8) Then the third circle:
Separate settings: Bevel Emboss, Inner Shadow, Inner Glow
The reference values are as follows:
Note: A small rounded rectangle needs to be subtracted from the right;
(9) Then make three circles in turn;
The effect is as follows
Note: Each circle in the image is a gradient color
The specific color value can directly absorb the color on the image, and finally adjust it.
The style reference values of the three circles are as follows:
(10) Key point: Convoluted texture of metallic texture:
Ctrl + left mouse button click on the layer thumbnail of layer 3;
Ctrl+Alt+Shift+N creates a transparent layer and fills it with black;
Then find the Add Noise command under the Filter menu
The specific settings are as follows
The purpose of choosing a single color is to remove the color. The Gaussian distribution will be denser than the evenly distributed noise. The larger the number, the more noise.
Then find Radial Blur under the Filters menu. Adjust the specific values as shown below:
Finally, you only need to adjust the opacity of the layer or adjust the style of the image (such as multiplication, overlay, depending on the individual)
(11) Followed by four circles, the specific values are shown in the figure below
(12) Next are 4 stroke circles
Colors are drawn directly from the material
(13) Next make three rings
The first one I set up a mask, because he is the kind that disappears slowly, and it is faster to erase with a mask.
（14）
Let's start again with our best lens flare.
First we need to create a circle with a radial gradient:
I have adjusted the specific colors here for a long time. My color values are #fdf6e6, #bdd968, #f9a400 from left to right.
(Specific to you, it needs to be fine-tuned)
The whirling texture is mentioned above, you can look back at the above
(14) On the halo circle just made, create three new adjustment layers to create a clipping mask, and at the same time create a layer mask, and blacken the surrounding area to leave the brightest part.
Method: Apply directly with a brush (adjust the brush size, hardness, flow) for the final effect, refer to the figure below
(15) Finally, make a purple radial gradient circle, and set the inner glow and shadow
At the same time, create two new ellipse layers and create a clipping mask with this layer. The purpose (to point out highlights and reflections) is to use a brush and a mask to point directly here.
The final effect refers to the following picture:
(16) Next is the last structure circle, everyone has only two steps away from the final effect.
Just set the outer glow effect.
Then there are highlights and reflections, here I use ellipses to do it;
An orange radial gradient ellipse and a purple radial gradient ellipse;
Orange ellipse color value: #ffffff, #ffe600, #d8792c, don't forget to adjust the center point of the radial gradient;
Purple ellipse color value: #ffffff, #6e6572, #403345, don't forget to adjust the center point of the radial gradient;
Don't forget to adjust the feather value of the shape appropriately in the properties
The final effect can refer to the following figure
(17) The last step is to directly tick out the advertisement with a reflective pen
Adjust the opacity of the layer;
Precautions:
- Once outlined, click on the layer thumbnail for the largest circle, create a mask, and place the light out of the camera.
- You need to use the brush again to enhance the qualified highlights in the picture (such as the red circle in the figure below)
(20) Finally, if you want to be more perfect, you need to pay attention to a few highlights and reflections, and add a noise to all layers, so that it will look more similar
Don't forget to add text. The method of adding text is to draw a circle directly, then select the text tool, and then click the path box of the circle to type directly.
As shown below
We have finished the effect of this lens, and I wish you all a bright future! thank you all!