Main functional division
Tabs: Various Actions
Project Browser: Because Revit can be understood as the process of building blocks, you need to enter various planes and perspectives from here to operate.
1. Enter the south elevation view to modify the elevation
2. Create Level 3
3. Create the remaining levels by copying
When modifying the elevation name, remember to modify the view name at the same time, otherwise it will be easy to mess up
4. Start modeling the floor plan
5. Draw the wall on the built grid
Painting doors and windows after painting walls
More door and window styles can be obtained by loading
6. Copy the floor
First select the part to be copied
Then
to complete the copy
7. Modify the copied floor
Go to the copy floor in the project browser, then make a box selection, then click Filter
Select the doors and windows, then click OK, and then press the del key to delete all doors and windows
split wall
Click Split, and then click the position to be split (for example, in the middle of a wall) The picture below is the completed split
How to use alignment
ex: click on it, select target a to be aligned to the position, select target a, that is, complete the alignment
Then create that floor slab
Create slabs with end lines (so it is convenient to overhang slabs)
after extension
8. Paint the roof
Note: From which floor the roof is drawn on which floor plan
For example my roof from F3 then I draw the roof in the floor plan of F3
ps: You can select the viewer if you need perspective when displaying
The above is the viewer effect
Select the corresponding elevation to see the corresponding layer effect
9. Change the color of the exterior walls
First select the exterior walls you want to change the color (or use the filter to select all)
then select
then click
Then select the first layer and click Insert (so that the inserted layer is on the outermost side, which is the painting effect)
10. Draw the stairs
Stairs are to be drawn on the starting floor plan
For example, I need stairs from F1-F2, then I want to draw the stairs in F1
11. Exteriors
First go to the floor plan - scene in the project browser (I am 0F here) and then draw the reference plane
Access to the massing and site-topographic surface