Recently, due to work needs, the H3C SecPath F100-C firewall was configured in the Tianjin Unicom computer room:
The network topology diagram is as follows:
Enter the system management interface:
Default login address: 192.168.0.1
The screenshot has not been uploaded because it involves company information. You can refer to the reference I provided:
1. System management - user management:
( Note to modify the default password and common access accounts, and assign operation permissions )
2. Application Control - Basic Configuration - Select Interface Type:
( Configure the firewall interface type, pay attention to select wan port <0/4>, lan port <0/0--0/3> )
3. System management - interface management:
(My configuration: the 0/0-LAN port of the device is connected to the switch, and the 0 /4-WAN port is connected to the interconnection IP)
4. Network configuration - routing management:
( Add the static routing table of the WAN port, the destination ip and mask are both 0.0.0.0, and the next hop is the gateway address of the interconnection IP of China Unicom computer room )
5. Firewall Management - Security Domain Management:
( Add the corresponding interface 0/0, 0/4 security zone to trust level )
6. Firewall management- interzone policy -ACL-ACL configuration information:
( Added Advanced ACL No. 3000 , rule matching order Config)
7. Firewall Management - Inter-Domain Policy - NAT - Address Translation Management:
( Bind ACL number 3000 to interface 0/4, conversion type: easy-ip)
8. Firewall Management - Inter-Domain Policy - NAT - Internal Server:
( Modify the port mapping relationship of the intranet server )
9. Network configuration - configuration management - configuration browsing:
( View overall profile information )
10. Network Configuration - Configuration Management - Configuration Save:
( Be sure to save the configuration file after modification )