1. AG9310-MEQ function overview
ALGOLTEK AG9310 is a USB Type-C to HDMI data converter. Supporting the USB Type-C display port alternative mode, the AG9310 can transmit video and audio streams from the USB Type-C interface to the HDMI port. In AG9310, different configurations of 1 channel, 2 channels @1.62Gbps, 2.7Gbps and 5.4Gbps frequency input are supported, and HDMI supports 4K2K@30Hz output. Product manufacturers can use the AG9310 application to easily implement Type-C to HDMI data converter conversion.
Features of AG9310-MEQ
Embedded 16-bit MCU
AG9310 supports EDID and MCC pass-through
Support hot plug detection
AG9310 supports external SPI flash firmware upgrade
Support embedded HDCP 1.4
1.2V core power supply and 3.3VI/O power supply
Embedded 5V/1.2V High-efficiency voltage regulator
Simultaneous display of
2KV ESD performance through HDMI output
Support downstream spread spectrum clock (SSC)
3. AG9310-MEQ equipment information
4. AG9310-MEQ application scenarios
USB Type-C converter
USB Type-C docking station
TV/projector Type-C interface connection
Figure 2 Type-C to HDMI converter application
5. AG9310- MEQ system block diagram
VI. AG9310-MEQ pin mapping and description
AG9310MEQ pin description
Seven, AG9310-MEQ DEMOBOARD reference circuit is as follows:
AG9310 design TYEP-C docking station or TYPE-C audio and video converter product circuit design and AG9310 demoboard circuit design differences are as follows:
Demo Board design reference circuit:
Crystal oscillator reserved R76 pull-up resistor
The Type C interface connected to the Video source side is a Type C female socket:
provide customer design reference lines:
The crystal oscillator does not reserve a pull-up resistor
The Type C interface connected to the Video source side is a pad or Type C male connector:
