AG9310MEQ AG9310MFQ Two USB TYPEC to HDMI audio and video data conversion function chip parameter differences and design circuit reference
The AG9310 series are chips used to design full-featured USB TYPEC to HDMI audio and video data conversion products. Both AG9310MEQ and AG9310MFQ support the USB Type-C display port alternative mode, which can transmit video and audio streams from the USB Type-C interface to HDMI port. In AG9310MEQ and AG9310MFQ, different configurations of 1 channel, 2 channels @1.62Gbps, 2.7Gbps and 5.4Gbps frequency input are supported, and HDMI supports 4K2K@30Hz output. Therefore, both AG9310MEQ and AG9310MFQ can easily realize the conversion of Type-C to HDMI data converter.
Parameter characteristics of AG9310MEQ and AG9310MFQ:
Embedded 16-bit MCU
AG9310 supports EDID and MCC pass-through
Support hot plug detection
AG9310 supports external SPI flash firmware upgrade
Support embedded HDCP 1.4
1.2V core power supply and 3.3VI/O power supply
Embedded 5V/1.2V high efficiency voltage regulator
Simultaneous display through HDMI output
2KV ESD performance
Support downlink spread spectrum clock (SSC)
The difference between AG9310MEQ and AG9310MFQ is that AG9310MEQ requires SPI to successfully realize USB TYPEC to HDMI projection, and it can be updated in real time with the compatibility of some new models on the market such as TYPEC interface mobile phones, TYPEC interface MAC and IPAD products. The so-called FW function.
AG9310MFQ is currently the latest chip built-in SPI to realize USB TYPEC to HDMI projection. However, for special or the latest Type-C interface handheld and computer adaptation, it cannot be recognized or has compatibility problems. Product upgrades and online updates are not allowed, that is, the so-called lack of FW function.
The packaging and printing of AG9310MEQ and AG9310MFQ chips are as follows:
The block diagram of the design structure of AG9310MEQ and AG9310MFQ in the design of USB TYPEC to HDMI audio and video data conversion products is as follows:
AG9310MEQ and AG9310MFQ design USB TYPEC to HDMI audio and video data conversion products applicable scope and advantages:
The schematic diagram of the above TYPEC to HDMI audio and video conversion circuit designed by AG9310MEQ is as follows:
The circuit schematic diagram of AG9310MFQ designed USB TYPEC to HDMI audio and video data conversion product is as follows:
