Moldflow2021 , the full name of Autodesk Moldflow insight2021 , is the latest plastic injection molding simulation software released by Autodesk. The powerful simulation technology can be used to solve the problems of plastic injection molding and support and guide staff, mold manufacturers and engineers in simulation settings. , It can detect and display the changes of wall thickness, gate position, material and geometric shape. At the same time, the software also includes the Fusion 360 product push function, which can help users quickly simplify and repair CAD, support the one-click solution function to mesh and analyze the model step by step to improve productivity, and it has built-in orthogonal The anisotropic part plug-in can simulate continuous fiber inserts made of composite materials or wood, and analyze any over-molded part defects to achieve the most perfection.
Compared with the previous version, moldflow2021 has added some more practical functions. For example, in the new function of reactive micro-hole injection molding, it is not necessary to enter the cavity during the injection molding of a single-phase solution of polymer and supercritical fluid. Under pressure, the supercritical fluid will escape from the solution and form very small bubbles. In addition, when calculating the constraint on the distribution core or part insert for the core offset, the constraint can be supported to specify the retracting time. This function can be used to describe the core support pin that is retracted during the molding process, and the constraint The conditions are marked as scalable checkboxes so that the staff can see this information better. In general, the 2021 version has been greatly improved on the original basis.
ps: This site provides the moldflow2021 cracked version , which is the insight2021 version of the series. The attached license file can perfectly activate the software. For detailed installation tutorials, please refer to the following. Friends in need are welcome to download and experience.
Original link: http://www.ddooo.com/softdown/180658.htm
Moldflow2021 crack installation tutorial:
1. After downloading all files on this site and decompressing them, you will get the original program and license file of Autodesk Moldflow insight2021;
2. Decompress and load the image file again;
3. Default target file, click OK;
4. Click install to start the installation;
5. Tick I accept the option and click next;
6. As shown in the figure, enter any one of the serial number 666-69696969, 667-98989898, 400-45454545 or 066-66666666, and continue the installation as prompted;
7. The default installation directory [C:\ Program Files\Autodesk\], click Install;
8. Open the cracked file and run "NLM_2020_x64_setup.msi" to install the network license manager
9. To facilitate subsequent installation, move the cracked license file adesk.lic to the network license management under directory;
10, xf-adsk2020-netcrk-win folder "adskflex.exe" copy or replace the software license manager directory under
the default installation directory [C: \ Autodesk \ Network license Manager \ ]
11, Then copy or replace the "adlmint.dll" in the xf-adsk2020-netcrk-win folder to the
default installation directory under the software license manager directory [C:\Program Files (x86)\Common Files\Autodesk Shared\AdskLicensing\ 10.1.0.3194\AdskLicensingAgent】
12. Right-click the notepad to edit and crack the license file adesk.lic, fill in your computer name and MAC address, and save it after editing
Note: Obtaining the physical address [A85E45A0FA22] does not require the "-" in the middle.
Note: The physical address of the network card needs the address you are in use. Generally, there are wireless network cards and local network cards. If it is local, use the local network card address.
13. Start the desktop to generate LMTOOLS Utility, click the Config Service tab, and add the service:
Service Name: Autodesk
Path to the lmgrd.exe file: C:\Autodesk\Network License Manager\lmgrd. exe
Path to the license file: C:\Autodesk\Network License Manager\adesk.lic (have been placed in the network license manager directory in the previous step)
Check User Services and Start Servic at Power UP, then click Save Service, Whether to add a point is
14. Click the Service/License File tab, and check LMTOOLS ignores license file path environment variables
15. Click the start/stop/read option, click'rereadlicense file', and then click'start server' to start the service
16. Click Server On the Status tab, click on Perform Status Enquiry and check if you have "adskflex: UP v11.16.2". Check function is activated: For example,............: User (100 licenses have been issued; 0 licenses are in use)
17. In server diags, select all functions to check out. If you configure the log, then check the log will also win "Configuration Service";
18. Start the application, and then select "Use Network License";
19. Open After the software, as shown in the figure below, the above is all the installation tutorials about the Autodesk Moldflow insight2021 cracked version. The pro-test is effective and I hope it will be helpful to you.
New features of autodesk moldflow insight2021
1. Reactive microporous injection molding
Reactive microporous injection molding is a process of injection molding using a single-phase solution of polymer and supercritical fluid (SCF). Once this polymer solution enters the cavity and is no longer under pressure, the supercritical fluid will escape from the solution and form very small bubbles. The process of bubble growth is not instantaneous, but stops once the polymer becomes a solid. This process is similar to the thermoplastic microporous injection molding process. The difference is that the material is thermoset. The 3D mesh type supports this process.
2. Chemical foam molding
In this process, usually a small amount of resin is first distributed into the cavity. The remaining cavity volume is then filled by the foaming process that occurs in the resin. The foaming gas is produced by a chemical reaction that occurs during the molding process. The reaction process that generates this foaming gas will be considered in the simulation process. Polyurethane (PU) foam molding is the most common example of chemical foam molding. The 3D mesh type supports chemical foam molding.
Note: It is recommended to select "General PU foam material" from the database as the molding material for this process.
3. Scalable core constraints
Now when assigning constraints on cores or part inserts for core offset calculations, it is now possible to specify retractions for constraints, after which the constraints will no longer work. This function can be used to describe the core support pin retracted during the molding process. The retraction time can be set when the constraint is created or by editing an existing constraint. The check box to mark the constraints as scalable is visible only when the constraint conditions option is set to core shift analysis in the following locations.
Software features
1. One-click solution
Improve productivity by meshing and analyzing the model step by step.
2. Fusion 360 is used for CAD preparation.
Moldflow includes Fusion 360 product push function, which can help quickly simplify and repair CAD.
3. Collaborate using shared views. Collaborate
using cloud-connected devices to share results, comments, and design suggestions.
4. Database of more than 10,000 materials The
built-in database contains information on thousands of tested thermoplastic and thermoset materials.
5. Mold and insert material distribution
Pre-assembled materials can be used to distribute parts and mold insert materials and mold block materials to improve accuracy.
6. Orthotropic parts plug-in
Simulate continuous fiber inserts made of composite materials or wood, and analyze any over-molded part defects.
7. Mold cooling
Create or import advanced cooling layouts, such as conformal cooling, and analyze transient heat calculations.
8. Induction mold heating
Simulate electromagnetic induction heating of mold components.
9. Core deflection prediction
Simulate unidirectional core deflection of parts with inserts.
10. Overmolding
Evaluate the sequence of insert overmolding, two molding overmolding and compression overmolding.
11. Compression and injection compression
Simulate the charge or injection of the material entering the cavity, then close the mold and compress it.
12. Multi-barrel injection
analysis and evaluation of the use of multiple injection-molded barrels to fill injection-molded parts.
13. Gas-assisted injection molding
Model the gas channel and entry point to predict the best time and gas volume required to fill the part.
14. Micro-hole injection molding
Analyze micro-hole injection molding with constant density and fitting the classic nucleation model.
15. Automatic packaging/holding control
Automatically determine the size and duration of the filling pressure curve.
16. Double injection and co-injection molding
Inject two materials into a cavity and determine the relative distribution and position of the materials.
17. Microchip packaging.
Use tools for designing packages, tools, lead frames and wires to predict wire sweep and paddle movement.
18. Automation through API
Application Programming Interface (API) automation tools allow you to quickly create custom scripts.
19. Clean, customizable user interface The
easy-to-understand user interface guides users through settings, analysis and result interpretation.
20. Visual and textual results
View results based on vision or text, such as fiber orientation, traceability of surface defect paths, and birefringence.
21. The flexibility of result export
Export results through automatic report, export hard data through scripts, CAD export of deformed geometry and FEA format.