table of Contents
-
- 1. The environment needs to install a VMware virtual machine
- 2. Need to download a Linx Centos7 image
- Install Centos7 image
-
- 1. Create a virtual machine
- 2. Type of configuration
- 3. Virtual machine hardware compatibility
- 4. Choose to install the operating system
- 5. Name the virtual machine
- 6. Assign memory to the virtual machine, and network configuration
- 7. Select Disk
- 8. How much space is allocated for this virtual machine CentOS
- 9. The virtual machine is created
- 3. Install the downloaded Centos image
- If you need to switch the operating mode (command line/view)
Install a liunx system on your computer and practice liunx commands.
1. The environment needs to install a VMware virtual machine
- Download this software first: download link
- We need to install the liunx system on this virtual machine. After downloading, install it in the next step normally.
2. Need to download a Linx Centos7 image
Go to the Aliyun site to download faster: download link
CentOS-7-x86_64-DVD-2009.isoThis is the standard version, you can choose this for daily learning. recommend
Install Centos7 image
1. Create a virtual machine
2. Type of configuration
3. Virtual machine hardware compatibility
The default next step is fine
4. Choose to install the operating system
5. Name the virtual machine
6. Assign memory to the virtual machine, and network configuration
7. Select Disk
8. How much space is allocated for this virtual machine CentOS
- 20GB recommended
9. The virtual machine is created
3. Install the downloaded Centos image
1. Start this virtual machine
In some models, there will be a prompt that the computer is not in the virtual machine mode.
I ran into it, the Lenovo computer I used. Restart and quickly press F2 to enter the debugging page. The keys to enter the debugging page are different for other models. You can find it on Baidu.
- Shut down, boot, and when booting, press F1 today's BIOS setting page;
- Select Security, then select Virtualization and click enter to enter the function. In the new function, select Intel ® Virtualization Technology. At this time, the option should be disabled (closed);
- Change disabled (closed) to enabled (open);
- Save the settings, click F10, save and exit, restart
2. After entering, select the first installation
3. Select the language of the system
Chinese is at the bottom, you can see it by sliding down.
Choose some simple settings
Hold down the Ctrl key and add Alt, and the data arrow can be moved out.
Turn on network connection
4. Then you can install
set password
When creating, you can set a password and create a user
5. After installation, restart.
Installed; this is the command line interface
ok,
If you need to switch the operating mode (command line/view)
Switch between command line interface and graphical interface of linux system. link
