Source of question bank: Safety production mock examination, WeChat public account mini program
2021 N1 forklift driver examination materials and N1 forklift driver operating license examination, including answers and analysis of N1 forklift driver examination data and N1 forklift driver operating license examination exercises. Combining the latest syllabus of the national N1 forklift driver exam and the summary of the real questions of the N1 forklift driver exam from the safety production simulation test, Yidiantong, will help N1 forklift drivers practice before the exam.
1. [True/True] When the vehicle starts, the driver must check whether there are people and obstacles around, and then start by sounding. () (√)
2. [True/True Question] The air intake pipe and the air filter are blocked, and the poor air intake may cause the exhaust to emit white smoke. () (×)
3. [True/Treatment] The ability of gasoline to transform from liquid to gas is called the vaporization of gasoline. () (√)
4. [True/Judgement] In non-emergency situations, it is strictly forbidden to brake suddenly, in order to prevent the goods from being thrown out and damaged under the action of inertial force and hurting people. At the same time, it is also strictly forbidden to turn at high speed. () (√)
5. [Judgement Question] The "Technical Supervision Regulations for the Safety of Special Motor Vehicles in the Yard (Factory)" stipulates that the driver of the forklift truck may not be equipped with safety belts and other protective restraints. (×)
6. [Judgement Questions] The "Technical Supervision Regulations for the Safety of Special Motor Vehicles in the Field (Factory)" stipulate that when the user purchases a sightseeing vehicle, the design grade of the sightseeing vehicle shall be guaranteed to meet the requirements of the maximum grade in the driving line of the user. , And clearly stated in the sales contract. (√)
7. [True and True] Before long-term storage of the truck, an appropriate proportion of antifreeze should be added according to the lowest ambient temperature. () (√)
8. [True and True] For the internal combustion field vehicle, the electrical system is mainly used for the starting and lighting of the field vehicle, so there are fewer electrical components and the structure is relatively simple. () (√)
9. [True/True Question] The power plant is the heart of the vehicle, which provides the energy required for the vehicle's driving, steering, and work. () (√)
10. [True and True] The shift clutch in the power shift transmission is the same as the main clutch, which is generally compressed by spring and mechanically separated. () (×)
11. [Judgement Questions] The "Special Equipment Safety Law of the People's Republic of China" stipulates that the department responsible for special equipment safety supervision and management should strengthen special equipment quality publicity and education, popularize special equipment quality knowledge, and enhance the public's awareness of special equipment quality. () (×)
12. [True and True] Forklift lifting chains generally include plate chains and sleeve roller chains. () (√)
13. [Judgement Question] When a forklift is driving, the driver's visual judgment is related to the performance of the vehicle. (×)
14. [True/True Question] Choose a charger that matches the battery, and the battery that is not used for a long time needs to be replenished once a month. () (√)
15. [True/True Question] The battery must be well ventilated in the charging room during the charging process. () (√)
16. [True/True Question] During the battery charging process, only need to open the vent holes of individual battery cells, not all the vent holes of single battery cells. () (×)
17. [True and True] Under normal circumstances, forklifts can be driven by a mixture of people and goods. (×)
18. [True/True Question] When vehicles enter and exit the workshop and warehouse gates, let the vehicles entering and exiting the door. () (√)
19. [True/True Question] Single fork can be used when the cargo cannot be lifted by double fork. (×)
20. [True and True] Forklifts must not turn on slopes or run across slopes. (√)
21. [True/Treatment] General truck transportation and operations are carried out alternately, and transportation operations are frequent. () (√)
22. [True/True Question] In general, the forklift can carry one person. () (×)
23. [True and True] hydraulic motor can convert the pressure energy of liquid into mechanical energy. () (√)
24. [True and True] When the forklift is operating at night or driving in a crowded section, the driving speed should be reduced. () (√)
25. [True/True Question] Auxiliary components such as oil filters can be omitted in hydraulic transmission. () (×)
26. [Judgement Question] Special equipment inspection and testing agencies and inspection and testing personnel use inspection and testing work to deliberately create difficulties for special equipment manufacturers and users. Special equipment manufacturers and users have the right to complain to the special equipment safety supervision and management department, and the special equipment that receives the complaint The equipment safety supervision and management department shall conduct investigation and handling in a timely manner. () (√)
27. [Judgment] () The "Special Equipment Safety Law of the People's Republic of China" stipulates that in violation of the provisions of this law, one shall bear civil liability for compensation and pay fines and fines, and if the property is insufficient to pay at the same time, the fines and fines shall be paid first. (×)
28. [True and True] It is a general violation to use special motor vehicles in the field (factory) that have not passed the inspection. () (×)
29. [Judgment] During the use of the vehicle, if there is a major failure, the cause should be found out immediately, and the failure can only be used after the failure is eliminated. For general failures, it does not matter if you continue to use it. () (×)
30. [Judgment] Before operating the forklift for the first time, you should carefully read the "Forklift Instruction Manual", and operate in strict accordance with the relevant provisions of the manual to ensure the safe and normal use of the vehicle. (√)
31. [True/Treatment] For repair welding of the fuel tank, first flush out the oil in the fuel tank with water, and then repair the welding. () (×)
32. [Single-choice questions] The maintenance of vehicles should implement the principle of (). (B)
A. Mainly repair and maintain timely
B. Prevention first, mandatory maintenance
C. Follow-up repair and safe operation
33. [Single-choice question] The viscosity of diesel oil is too large, its fluidity and atomization and evaporation (). (B)
A, get better
B. Deterioration
C, unchanged
D. Not sure
34. [Single-choice questions] The following are not in the category of park cars (): (C)
A. Forklift
B. Sightseeing car
C. Sprinkler
35. [Single-choice question] Description of tire specifications: 195/65R1588, where 88 means: (). (C)
A. Tire width
B. Rim diameter (inches)
C. Load index
36. [Single-choice question] Parking should be on the road () or at a designated place. (B)
A, left
B. Right
C, whatever
D. On the slow lane
37. [Single-choice question] When electrical equipment, wiring, etc. catch fire, you can use () to put out the fire. (B)
A, cotton yarn
B. Dry powder fire extinguisher
C, water
38. [Single-choice question] Parking vehicles are not allowed to be parked within () m from intersections, crossings, turns, tunnels, dangerous areas, factories, and warehouses. (C)
A、5
B、10
C、15
39. [Single-choice question] Suitable for areas where the lowest temperature with a risk rate of 10% is between -29°C and -44°C is () diesel. (C)
A, -20
B, -35
C, -50
40. [Single-choice question] Which of the following is wrong to give way. () (D)
A. Downhill cars let uphill cars
B. Forklift let the car
C. Small cars let big cars
D. Big cars let small cars
41. [Single-choice question] In the engine, in order to ensure the seal of the piston ring and prevent the gas from leaking through the end gap of the piston ring, when installing the piston ring, be sure to press () on the cut end gap of each piston ring. (B)
A, sequence alignment
B. Staggered regulations
C. The orientation is aligned.
42. [Single-choice questions] When the hydraulic pump and the oil suction pipe produce () phenomenon, there will be symptoms such as shock, vibration, noise, and high temperature. (A)
A. Cavitation
B, high pressure
C, high temperature
43. [Single-choice question] Recognition of forklift parts-what forklift part is this? 
(D)
A. Diesel filter
B. Air filter
C. Forklift drive axle
D. Forklift speed sensor
44. [Multiple choice questions] The hazards of overloading tires are (). (ABC)
A, tire deformation is too large
B. Severe fever
C, easy to cause explosion
D. The running speed decreases
45. [Multiple choice] The following operation methods are correct when the forklift is working (). (ABC)
A. In the process of loading and unloading items, brakes must be used to stabilize the forklift
B. Forklifts are not allowed to use brakes to inertially drop items
C. It is not allowed to fork-load cargo on board directly on the shore of the wharf
D. After unloading the cargo, you can go back and load the cargo without putting the fork to the lowest point.
46. [Multiple Choice Questions] The hazards of speeding are (). (ABD)
A. The centrifugal force increases when turning, prone to lateral rollover
B. "Aggravated" phenomenon occurs in the concave section
C. The braking distance is reduced
D. Increase the impact force during braking
47. [Multiple choice questions] The secondary door frame lifting system mainly includes (). (ABCD)
A. Inside and outside mast
B. Fork frame, fork
C. Working cylinder
D. Chains and rollers
48. [Multiple-choice questions] The certification data of the special equipment safety technical files include (). (ACD)
A. Proof of regular inspection, modification and maintenance
B. Manufacturing quality certificate
C. Daily maintenance records
D. Operation failure and accident records
49. [Multiple choice questions] The stability requirements of forklifts under normal conditions include (). (ABCD)
A. Longitudinal stability when fully loaded
B. Longitudinal stability during full load operation
C. Lateral stability when fully loaded
D. Lateral stability during no-load operation
50. [Multiple choice questions] Forklift operation performance includes (). (AD)
A. Traction performance
B. Mast angle
C. Stability
D. Braking performance
The above is the 2021 N1 forklift driver examination data and the N1 forklift driver operating license examination. Support accurate N1 forklift driver test questions in all regions of the country, support safety qualification certificate, special operation certificate, vocational skill appraisal and other types of job exercises.