Without a router, a network cable can complete the laptop SSH remote connection to the Raspberry Pi
1. Material preparation
One Raspberry Pi, one network cable, and one laptop.
2. Operation steps.
1. Connect.
Connect the power cord to the Raspberry Pi.
Connect one end of the network cable to the Raspberry Pi and the other end to the laptop.
2. Sharing the Internet
The access to the Internet network share Wifi for "Ethernet" network and Sharing Center, click on the wireless network -> Properties -> Shared give " to allow other network computer by which the user is connected to internet " tick, and then determine.
![Insert picture description here](https://img-blog.csdnimg.cn/20210119210630145.png#pic_center
3. Find the IP address of the Raspberry Pi
Run the DOS window, enter cmd, enter arp -a, the dynamic IP address under the interface 192.168.137.1 is the address of the Raspberry Pi
4. Use IP to log in to PUTTY
You can get the software by sending "PUTTY" to the WeChat official account.
Enter the Raspberry Pi IP and click confirm.
Enter the account pi and password raspberry to enter the Raspberry Pi terminal.
Note: If you are using the old version of the system provided by our official account , follow this procedure. can. If you are using the new system, you need to turn on the SSH switch to connect to PUTTY. For the specific process, please refer to the tutorial on installing the new system.