Recommend STM32F030K6T6 domestic compatible replacement core horse XM1008K6T6
Introduction of STM32F030K6T6
STMicroelectronics MCU model STM32F030K6T6, based on the ultra-low power ARM Cortex-M0 processor core, has a high cost performance. This series of MCUs has shortened the performance gap between devices that use 8-bit and 16-bit MCUs and those that use 32-bit MCUs, and can implement advanced and complex functions on economical user terminal products, and are widely used in various industries.
The microcontroller uses a high-performance core M0 48 MHz 32-bit RISC core, and high-speed embedded SRAM memory as well as a wide range of enhanced peripherals and I/O. All microcontroller devices provide standard communication interfaces, a 12-bit ADC, seven general-purpose 16-bit timers and an advanced control PWM timer. The STM32F030K6T6 microcontroller has an operating voltage of 2.4 to 3.6V and an operating temperature range of -40 to +85°C. With a comprehensive power saving mode, it can be used to design low-power applications. This model can be 1:1 compatible replacement with Shenzhen Xinma Technology XM1008K6T6.
XM1008K6T6 is not just a full replacement
- More SRAM: Embed up to 32Kbytes flash and 8Kbytes SRAM. Break the ratio of Flash and SRAM in the industry and adopt a high ratio of 4:1,
- 2-way Uart: More peripheral resources (8 Timers, 2 Usart) to improve user experience and cost performance.
- Wider voltage: support 2V~5V
- Higher ESD performance: up to 4000V
- RTC compatible crystal more
Several small breakthroughs of XM1008K6T6
- Do not modify the software replacement, can achieve 100% perfect replacement
- M0 core Coremark runs the same score as ST, the core will not slow down (really achieve performance replacement)
- ADC accuracy
- ESD can reach 4KV, SRAM with parity check reliability index
- Flash erasing and writing is guaranteed 20,000 times, and the life span is 100 years at room temperature
Product features of XM1008K6T6
memory
up to 32KByte of Flash memory. Support 0 wait (frequency not higher than 24MHz)
up to 8KByte SRAM, with parity check, enhance the stability of the system Operating
voltage range
dual power domain: main power supply VDD 2.0V ~ 5.5V, backup battery power supply VBAT 1.8V ~ 5.5V When the main power supply VDD is powered off, the RTC module can continue to work under VBAT power supply
Flexible power management system
Stop Standby power consumption: [email protected]
Standby Standby power consumption: [email protected]
Operating temperature range
-40ºC ~ ~ 105ºC or 85ºC -40ºC
l clock module
internal high-speed oscillator 8MHz ̶
internal high-speed oscillator ̶ 14MHz
̶ speed internal oscillation 40KHz
̶ ~ 32MHz external high frequency oscillator. 4
̶ external low speed oscillator 32.768KHz
̶ the PLL, the maximum 48MHz
l reset
the outer tube Pin reset
Power-on reset
Software reset
Watchdog (IWDT and WWDT) reset
Low-power mode reset A
12-bit SAR ADC converter——
10 external analog signal input channels——
Maximum converter frequency: 1Mbps
——Support automatic continuous conversion and scanning Conversion
RTC
̶ calendar function, when the main power is turned off when the data can be saved 20 bytes
5 the DMA channel
l Timer
̶TIM1 advanced control timer, the PWM output channel 6, the dead zone and brake functions.
̶TIM2/TIM3/TIM14/TIM15/TIM16/TIM17 general-purpose timers-
TIM6 basic timers-
24-bit SystemTick timers-
two kinds of WDT Universal
peripheral interface-
1 SPI interface: the fastest support 16MBit/s, 4~16 Bit frame format does not support the I2S
̶2 channel USART: wherein all the way to the interface with ISO7816, LIN, IrDA, and supporting Stop Auto baud wake
̶1 passage I2C: all the way to support fast mode 1MBit / s, support SMBus / PMBus, supporting Stop wake
package
- LQFP32