There is also openstack built by the oldest version of centos at home, vm has always been an error
I checked ifconfig 10.0.0.11 is normal. brqxxx occupies 10.0.0.11 address!
But the ifconfig of 10.0.0.31 is abnormal. brqxxx does not occupy 10.0.0.31 address!
Baidu check: openstack ifconfig brq no ip
See two articles https://blog.csdn.net/wangjinruifly/article/details/79765198?utm_source=blogxgwz8
Article 2
https://www.cnblogs.com/linuxk/p/9455420.html
Know some query commands
I probably checked the openstack component configuration file.
I think it is necessary to check why the ifconfig of 10.0.0.31 is abnormal. brqxxx does not occupy 10.0.0.31 address! Is it a problem with libvirtd.service, or
One more network bridge brqxxxxx, and the previous configuration of the IP address of the physical network card enoxxxx is assigned to the network bridge. View bridge information through brctl:
$ brctl show brqxxxx view information and 10.0.0.11 are correct, there are obvious differences! ! ! Caused
[root@compute1 ~]# ifconfig
brq7a72ae73-18: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet6 fe80::f81f:a0ff:fec4:756c prefixlen 64 scopeid 0x20<link>
ether fa:1f:a0:c4:75:6c txqueuelen 0 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 8 bytes 648 (648.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
brqe61c94f3-df: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet6 fe80::d0fb:9fff:fee8:e18b prefixlen 64 scopeid 0x20<link>
ether d2:fb:9f:e8:e1:8b txqueuelen 0 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 8 bytes 648 (648.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
eno16777736: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.0.0.31 netmask 255.255.255.0 broadcast 10.0.0.255
inet6 fe80::20c:29ff:febb:476e prefixlen 64 scopeid 0x20<link>
ether 00:0c:29:bb:47:6e txqueuelen 1000 (Ethernet)
RX packets 6984 bytes 1389212 (1.3 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 7968 bytes 5947314 (5.6 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 0 (Local Loopback)
RX packets 10135 bytes 535279 (522.7 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 10135 bytes 535279 (522.7 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
virbr0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
inet 192.168.122.1 netmask 255.255.255.0 broadcast 192.168.122.255
ether 52:54:00:0c:58:76 txqueuelen 0 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
[root@compute1 ~]#
[root@compute1 ~]#
[root@compute1 ~]#
[root@compute1 ~]#
[root@compute1 ~]# brctl show ^C
[root@compute1 ~]#
[root@compute1 ~]#
[root@compute1 ~]#
[root@compute1 ~]# brctl show brq7a72ae73-18
bridge name bridge id STP enabled interfaces
brq7a72ae73-18 8000.000000000000 no
[root@compute1 ~]#
[root@compute1 ~]#
[root@compute1 ~]#
[root@compute1 ~]#
[root@compute1 ~]# brctl show brqe61c94f3-df
bridge name bridge id STP enabled interfaces
brqe61c94f3-df 8000.000000000000 no
[root@compute1 ~]#
[root@compute1 ~]#
[root@compute1 ~]#
[root@compute1 ~]#
[root@compute1 ~]# brctl show brq7a72ae73-18
bridge name bridge id STP enabled interfaces
brq7a72ae73-18 8000.000000000000 no
[root@compute1 ~]#
[root@compute1 ~]#
[root@compute1 ~]#
[root@compute1 ~]# virsh list --all
Id 钖rugged О bell rudder €
----------------------------------------------------
[root@compute1 ~]#
[root@compute1 ~]#
[root@compute1 ~]#
[root@compute1 ~]# systemctl status libvirt
Unit libvirt.service could not be found.
[root@compute1 ~]# systemctl status libvirt
libvirtd.service libvirt-guests.service
[root@compute1 ~]# systemctl status libvirt
libvirtd.service libvirt-guests.service
[root@compute1 ~]# systemctl status libvirt
libvirtd.service libvirt-guests.service
[root@compute1 ~]# systemctl status libvirt
libvirtd.service libvirt-guests.service
[root@compute1 ~]# systemctl status libvirt
libvirtd.service libvirt-guests.service
[root@compute1 ~]# systemctl status libvirt
libvirtd.service libvirt-guests.service
[root@compute1 ~]# systemctl status libvirt
Unit libvirt.service could not be found.
[root@compute1 ~]#
[root@compute1 ~]# systemctl status libvirtd.service
鈼[0m libvirtd.service - Virtualization daemon
Loaded: loaded (/usr/lib/systemd/system/libvirtd.service; enabled; vendor preset: enabled)
Active: active (running) since 浜2020-10-27 22:00:41 CST; 29min ago
Docs: man:libvirtd(8)
https://libvirt.org
Main PID: 1304 (libvirtd)
CGroup: /system.slice/libvirtd.service
Beryllium sbin 1304 /usr/sbin/libvirtd
鈹溾攢2540 /usr/sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/default.conf --leasefile-ro --dhcp-script=/usr/libexec/libvirt_leaseshelpe...
鈹斺攢2542 /usr/sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/default.conf --leasefile-ro --dhcp-script=/usr/libexec/libvirt_leaseshelpe...
10chain 27 22:17:22 compute1 libvirtd[1304]: 2020-10-27 14:17:22.296+0000: 2348: error: virNetSocketNewConnectUNIX:712: 灏嗘彃妲borrowed 鎺ュ埌'/var/鈥鎷Jealous
10Chain 27 22:17:22 compute1 libvirtd[1304]: 2020-10-27 14:17:22.297+0000: 2348: error: virNetSocketNewConnectUNIX:712: 灏嗘彃妲borrowed 鎺ュ埌'/var/鈥鎷Jealous
10鏈27 22:19:18 compute1 dnsmasq[2540]: no servers found in /etc/resolv.conf, will retry
10鏈27 22:19:18 compute1 dnsmasq[2540]: reading /etc/resolv.conf
10鏈27 22:19:18 compute1 dnsmasq[2540]: using nameserver 223.5.5.5#53
10鏈27 22:19:29 compute1 dnsmasq[2540]: no servers found in /etc/resolv.conf, will retry
10鏈27 22:19:29 compute1 dnsmasq[2540]: reading /etc/resolv.conf
10鏈27 22:19:29 compute1 dnsmasq[2540]: using nameserver 223.5.5.5#53
10Chain 27 22:21:21 compute1 libvirtd[1304]: 2020-10-27 14:21:21.645+0000: 2350: error: virNetSocketNewConnectUNIX:712: 灏嗘彃妲borrowed 鎺ュ埌'/var/鈥鎷Jealous
10Chain27 22:21:21 compute1 libvirtd[1304]: 2020-10-27 14:21:21.646+0000: 2350: error: virNetSocketNewConnectUNIX:712: 灏嗘彃妲borrowed 鎺ュ埌'/var/鈥鎷Jealous
Hint: Some lines were ellipsized, use -l to show in full.
[root@compute1 ~]#
[root@compute1 ~]#
[root@compute1 ~]# systemctl restart libvirtd
[root@compute1 ~]# systemctl status libvirtd.service
鈼[0m libvirtd.service - Virtualization daemon
Loaded: loaded (/usr/lib/systemd/system/libvirtd.service; enabled; vendor preset: enabled)
Active: active (running) since 浜2020-10-27 22:31:13 CST; 1s ago
Docs: man:libvirtd(8)
https://libvirt.org
Main PID: 6280 (libvirtd)
CGroup: /system.slice/libvirtd.service
鈹溾攢2540 /usr/sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/default.conf --leasefile-ro --dhcp-script=/usr/libexec/libvirt_leaseshelpe...
鈹溾攢2542 /usr/sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/default.conf --leasefile-ro --dhcp-script=/usr/libexec/libvirt_leaseshelpe...
Beryllium condensed 6280 /usr/sbin/libvirtd
10鏈27 22:31:13 compute1 dnsmasq[2540]: read /etc/hosts - 4 addresses
10鏈27 22:31:13 compute1 dnsmasq[2540]: read /var/lib/libvirt/dnsmasq/default.addnhosts - 0 addresses
10鏈27 22:31:13 compute1 dnsmasq-dhcp[2540]: read /var/lib/libvirt/dnsmasq/default.hostsfile
10鏈27 22:31:14 compute1 libvirtd[6280]: 2020-10-27 14:31:14.043+0000: 6296: info : libvirt version: 4.5.0, package: 33.el7_8.1 (CentOS B...tos.org)
10鏈27 22:31:14 compute1 libvirtd[6280]: 2020-10-27 14:31:14.043+0000: 6296: info : hostname: compute1
10Chain 27 22:31:14 compute1 libvirtd[6280]: 2020-10-27 14:31:14.043+0000: 6296: warning: virGetUserIDByName:1005: User record for user'ts鈥︽枃浠機垨鐩綍
10Chain 27 22:31:14 compute1 libvirtd[6280]: 2020-10-27 14:31:14.043+0000: 6296: error: virGetUserID:1043 'Chan braid touch
10Chain27 22:31:14 compute1 libvirtd[6280]: 2020-10-27 14:31:14.044+0000: 6296: warning: virGetGroupIDByName:1085: Group record for user'鈥︽枃浠浠極垨鐩綍
10Chain 27 22:31:14 compute1 libvirtd[6280]: 2020-10-27 14:31:14.044+0000: 6296: error: virGetGroupID:1123: 镞犳晥鍙傛暟锛氲В鏋愮粍'tss' Chan braid touch
10鏈27 22:31:14 compute1 libvirtd[6280]: 2020-10-27 14:31:14.105+0000: 6296: warning : virQEMUCapsInit:955 : Failed to get host CPU cache info
Hint: Some lines were ellipsized, use -l to show in full.
[root@compute1 ~]# systemctl status libvirtd.service
鈼[0m libvirtd.service - Virtualization daemon
Loaded: loaded (/usr/lib/systemd/system/libvirtd.service; enabled; vendor preset: enabled)
Active: active (running) since 浜2020-10-27 22:31:13 CST; 7s ago
Docs: man:libvirtd(8)
https://libvirt.org
Main PID: 6280 (libvirtd)
CGroup: /system.slice/libvirtd.service
鈹溾攢2540 /usr/sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/default.conf --leasefile-ro --dhcp-script=/usr/libexec/libvirt_leaseshelpe...
鈹溾攢2542 /usr/sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/default.conf --leasefile-ro --dhcp-script=/usr/libexec/libvirt_leaseshelpe...
Beryllium condensed 6280 /usr/sbin/libvirtd
10鏈27 22:31:13 compute1 dnsmasq[2540]: read /etc/hosts - 4 addresses
10鏈27 22:31:13 compute1 dnsmasq[2540]: read /var/lib/libvirt/dnsmasq/default.addnhosts - 0 addresses
10鏈27 22:31:13 compute1 dnsmasq-dhcp[2540]: read /var/lib/libvirt/dnsmasq/default.hostsfile
10鏈27 22:31:14 compute1 libvirtd[6280]: 2020-10-27 14:31:14.043+0000: 6296: info : libvirt version: 4.5.0, package: 33.el7_8.1 (CentOS B...tos.org)
10鏈27 22:31:14 compute1 libvirtd[6280]: 2020-10-27 14:31:14.043+0000: 6296: info : hostname: compute1
10Chain 27 22:31:14 compute1 libvirtd[6280]: 2020-10-27 14:31:14.043+0000: 6296: warning: virGetUserIDByName:1005: User record for user'ts鈥︽枃浠機垨鐩綍
10Chain 27 22:31:14 compute1 libvirtd[6280]: 2020-10-27 14:31:14.043+0000: 6296: error: virGetUserID:1043 'Chan braid touch
10Chain27 22:31:14 compute1 libvirtd[6280]: 2020-10-27 14:31:14.044+0000: 6296: warning: virGetGroupIDByName:1085: Group record for user'鈥︽枃浠浠極垨鐩綍
10Chain 27 22:31:14 compute1 libvirtd[6280]: 2020-10-27 14:31:14.044+0000: 6296: error: virGetGroupID:1123: 镞犳晥鍙傛暟锛氲В鏋愮粍'tss' Chan braid touch
10鏈27 22:31:14 compute1 libvirtd[6280]: 2020-10-27 14:31:14.105+0000: 6296: warning : virQEMUCapsInit:955 : Failed to get host CPU cache info
Hint: Some lines were ellipsized, use -l to show in full.
[root@compute1 ~]#
[root@compute1 ~]#
[root@compute1 ~]#
[root@compute1 ~]#
[root@compute1 ~]#