The Pico car diagnostic oscilloscope turns your PC computer into a powerful car diagnostic tool to quickly find the increasing number of sensor, actuator and circuit faults on modern vehicles.
The 12-bit high-resolution PC oscilloscope module is connected to the USB interface of your computer, and can collect up to 250M samples, enabling it to capture complex car waveforms, including CAN bus and FlexRay signals; then amplify the suspicious area. Because it is based on PC, these waveforms can be stored in your PC for later reference, printing or e-mailing.
Powerful, easy-to-use PicoScope automotive software. An important component in the entire package is the powerful PicoScope automotive diagnostic software. Using PicoScope car diagnostic software is fast and easy. Just select the sensor or circuit to be tested, the software will automatically load the required settings, as well as the oscilloscope connection method of the component to be tested, reference waveforms, and common technical data.
The main function:
- Charging circuit and starting circuit test;
- Various sensor and actuator tests
- Ignition system test (including COP independent ignition test)
- LIN, CAN Bus and FlexRay signal test
- Serial decoding, support LIN, CAN, CAN FD, FlexRay, SENT and other protocols
- Math channel, built-in speed, frequency and other functions
- Relative compression ratio test of cylinder
- Battery test
- Probe recognition and automatic range setting
parameter:
| bandwidth |
20 MHz (10 MHz in ±50 mV range) |
| Number of channels |
2 |
| Vertical resolution |
12th place |
| accuracy |
±1% |
| Sensitivity |
10 mV/div to 40 V/div |
| Input range (full scale) |
±50 mV to ±200 V in 12 ranges |
| Input characteristics |
1 MΩ in parallel with 24 pF |
| Input type |
Floating, BNC connector |
| Input coupling |
Software optional AC/DC |
| Overload protection |
±250 V (DC + AC peak) on a single input |
| Maximum sampling rate 1 channel in use 2 channels in use 3 or 4 channels in use |
400 MS/s 200 MS/s 100 MS/s |
| Buffer capacity |
250 M sample |
| Wave buffer |
Up to 10,000 waveforms |
| Time base range |
100 ns/div to 5000 s/div |
configuration list:
| model |
Description |
| PQ177 |
Pico4225A two-channel standard set
|
