1. Industry application
For power inspection personnel, how to effectively improve the quality of inspection work? How to effectively informationize the inspection data? How to eliminate potential safety hazards during inspection work? This has been a problem for the inspection department for many years. With the development of the Internet of Things technology, senior practitioners use RFID technology to provide a systematic application solution for the intelligent inspection and management of power equipment, such as using bar codes, IC cards, information buttons and other means to monitor the work of inspectors.
RFID power equipment, RFID intelligent inspection management, RFID handheld terminal
The launch of FUWIT's RFID handheld terminal inspection management system based on power equipment has completely changed many problems in inspection work, which are mainly reflected in the following aspects:
1.1 No need to install any equipment on inspection equipment and power equipment, which greatly reduces the cost of system procurement and maintenance;
1.2 Effectively ensure the inspection quality of inspection personnel, improve the safety and reliability of equipment and electrical equipment, and eliminate potential safety hazards;
1.3 Adopt wireless network and RFID technology to realize the information management of power equipment inspection work.
According to the actual needs and characteristics of the inspection work, the RFID power equipment handheld terminal inspection system has functions such as route arrangement, data recording, work status supervision, data summary report, etc., and can be seamlessly connected with the existing information system of the power equipment enterprise, effectively To understand, check and inspect the working status of the inspection, find the defects of power equipment in time, improve the safety of power equipment and power equipment, reduce production and operation costs, and improve work efficiency. It has low cost, light and easy operation, and long equipment use time. And other significant advantages.
As a leading RFID brand, Shenzhen Quanshunhong Technology Co., Ltd. always adheres to the business model of "equipment + solution + service" while providing all major operators and integrators with a full range of ThingMagic products to automatically identify Technology as the core, with the overall application solution of the Internet of Things as the guide, with the purpose of technical service application, the effective integration of technology and application, and the creation and realization of application value, to provide a mature, stable, professional and detailed set of solutions for the Internet of Things industry. Value-added services. At the same time, relying on the advantages of brand and technology, combined with rich experience in technical services in the Internet of Things industry, in the field of smart warehousing and logistics, file informatization, smart new retail, smart manufacturing, smart washing, asset management, etc., from product selection , To the program design and system platform support, to provide users with easy-to-operate, highly stable, differentiated and innovative comprehensive technical services.
2. Scheme design and advantages
According to the actual needs and characteristics of the inspection work, the power equipment RFID UHF handheld terminal inspection system has functions such as route arrangement, data recording, working status supervision, data summary report, etc., and can be seamless with the existing information system of the power equipment enterprise Connect, effectively understand and check the working status of patrol inspection, and timely discover the defects of power equipment, improve the safety of power equipment and power equipment, reduce production and operation costs, and improve work efficiency. It has low cost, light and easy operation. Significant advantages such as long use time.
When the inspectors are out for inspections, they use the handheld terminal inspection device—ThingMagic handheld UHF RFID reader to send a message to the center automatically (every 2 minutes, the interval can be set) or manually to report the current Information such as the location and time of the inspector, if a fault is found, the fault type, equipment number and the current handheld device terminal RFID information are sent to the monitoring center.
The monitoring center receiver receives the reported information and stores it. The system reads the information received by the receiver through the system, breaks down the time, location, equipment type, and discoverer of the fault, and automatically stores these data information in the database server and publishes it on the Internet at the same time.
The monitoring terminal uses the RFID system to display the inspection status in real time on the software, such as displaying the fault points found by each inspector, the emergency situation of various faults, the processing situation, the current status, and the location of each inspector at a certain moment. Inspection route.
The system can also perform statistics, summary, and analysis of various historical data stored in the database, and display the frequency and target of a certain fault in a certain period of time in the format of various charts or reports, for managers to analyze through prediction Strengthen management and formulate response measures. To achieve the purpose of pre-control to reduce the accident rate and ensure the smooth progress of safe production.
3. Hardware equipment
3.1 RFID UHF handheld device terminal
W6100 RFID smart handset is a portable smart data acquisition device based on Android system development, integrating 1D or 2D barcode scanning, 4G full Netcom, GPRS, WIFI, BLUETOOTH, RFID functions; friendly interface, easy operation, integrated ThingMagic high Performance module, with the advantages of efficient inventory, remote scanning, accurate reading, etc.;
It is suitable for multi-scenario applications such as warehousing logistics, jewelry stores, archives and books.
RFID UHF handheld terminal, RFID handheld terminal, RFID data acquisition equipment
Features
3.1.1 Simple body design, high-definition large-screen display The machine adopts a simple body design and is built on a Corning Gorilla 5.5-inch IPS HD display. The item resolution of 1440*720 and the arc design of the corners take into account the comfortable grip and the fall resistance of the machine itself.
3.1.2 Powerful fast charging and WiFi roaming function The machine is equipped with an optional 9000mAh polymer lithium battery, which has a long-lasting battery life. It also supports the fast charging function, and the single charging time is shorter. And the powerful Wi-Fi roaming function can realize seamless switching of Wi-Fi hotspots and maintain an uninterrupted network connection experience.
3.1.3 RFID reading and writing function, multi-tag long-distance reading and writing. The machine adopts omnidirectional spiral antenna with professional scanning handle and shield. It supports UHF single tag and multi-tag reading, with farther distance, faster efficiency and complete The machine performance is more stable and the effective reading distance can be as high as 20m.
3.2 UHF RFID reader equipment
FU-Astra-M9 is an RFID integrated reader/writer with Linux operating system integrated with ThingMagic’s excellent M6e-Micro module as the core. It adopts ABS shell, built-in 9dbi circular polarization antenna, and provides power interface with IP67 protection level. It communicates with WIFI or TCP/IP or serial port, and supports an external antenna. The installation is simple and convenient, and it is suitable for all-weather high and low temperature harsh working environment.
It is widely used in smart storage and logistics, smart manufacturing, smart new retail, smart medical and other industry segments.
RFID integrated machine, UHF RFID reader, RFID
Features
3.2.1 Give full play to the advantages of Thingmagic RFID module algorithm, its excellent tag chip compatibility, support Alien H3, Impinj M series, NXP G2x* & G2i* series, and IDS Cool Log, RFMicron, Farsens and other sensor tag chips, Label compatibility is significant in the industry;
3.2.2 Support for multiple protocols including EPC Gen2 &ISO 18000-6C, EPC ISO 18000-6B*, IP-X*, Gen2v2, AEI ATA* and many other RFID protocol standards;
3.2.3 Fully supports ThingMagic Mercury API embedded operating system, provides .NET and Java SDK, can easily customize the interface, so as to control the reader as needed.
In recent days, thunderstorms and rainstorms of varying degrees have appeared across the country, and people's travel and life have been affected to varying degrees. In today’s era where electricity is used for everything, in order to ensure the normal life and order of the people, the normal supply of electricity is indispensable. In such bad weather, the labor intensity of power inspectors has also increased a lot. The UHF RFID handheld terminal inspection system for power equipment launched by Shenzhen Quanshunhong Safety Technology Co., Ltd. can improve the quality of inspections, informationize inspection data, and eliminate hidden dangers in the inspection process.
RFID power equipment intelligent inspection management solution