Article Directory
1. Experimental environment
One router, one switch, two PCs
2. Experimental purpose
Realize the communication between PC5 and PC6 through single-arm routing experiment
Three, experimental steps
R1
<Huawei>undo terminal monitor
<Huawei>system-view
[Huawei]sysname R1
[R1]user-interface console 0
[R1-ui-console0]id
[R1-ui-console0]idle-timeout 0 0
[R1-ui-console0]quit
[R1]int g0/0/0.1
[R1-GigabitEthernet0/0/0.1]vlan-type dot1q 101 default
[R1-GigabitEthernet0/0/0.1]ip add 192.168.101.1 24
[R1-GigabitEthernet0/0/0.1]quit
[R1]int g0/0/0.2
[R1-GigabitEthernet0/0/0.2]vlan-type dot1q 102 default
[R1-GigabitEthernet0/0/0.2]ip add 192.168.102.1 24
[R1-GigabitEthernet0/0/0.2]quit
[R1]display current-configuration
LSW3
<Huawei>undo terminal monitor
<Huawei>system-view
[Huawei]sysname LSW1
[LSW1]user-interface console 0
[LSW1-ui-console0]idle-timeout 0 0
[LSW1-ui-console0]quit
[LSW1]vlan 101
[LSW1-vlan101]quit
[LSW1]int e0/0/1
[LSW1-Ethernet0/0/1]port link-type access
[LSW1-Ethernet0/0/1]port default vlan 101
[LSW1-Ethernet0/0/1]quit
[LSW1]vlan 102
[LSW1-vlan102]quit
[LSW1]int e0/0/2
[LSW1-Ethernet0/0/2]port link-type access
[LSW1-Ethernet0/0/2]port default vlan 102
[LSW1-Ethernet0/0/2]quit
[LSW1]int g0/0/1
[LSW1-GigabitEthernet0/0/1]port link-type trunk
[LSW1-GigabitEthernet0/0/1]port trunk allow-pass vlan all
[LSW1-GigabitEthernet0/0/1]quit
[LSW1]display current-configuration