table of Contents
Introduction
Recently, Xiaohu played L on his home laptop, and lingered between 100 and 300 from time to time. Although most of the time was less than 60, he dropped the line when there was a high delay. It is too annoying to reconnect. Some ways to change the image accuracy on the Internet are aimed at the problem that the graphics card can't work. To be honest, Xiaohu's notebook 1G 5 years ago showed no problem with the L screen (adding a solid state drive), but the ping value remained high. Here Xiaohu shares some methods. After using it, the drop rate has dropped, and ping has stabilized slightly.
Solution
Method 1 background limitation
step one
Using a firewall similar to 360 traffic, after opening the game, many useless background network speeds are prohibited. For example like crossproxy.exe (one of the qt language rogue backgrounds).
Like 360, set the speed limit option this time to prevent the patch speed from going back to the next upgrade.
Step two
Clear the tmp cache file, old windows7 is in this folder, you can also use 360 and other software to clean up.
C:\Windows\Temp
Step three
Dns is preferred. If it is windows open cmd, then enter the following sentence. Remember not to turn it off, cut it out when there is a high ping delay, and then press the up arrow to repeat the code.
ipconfig \flushdns
Method 2 routing settings
This method of setting routers seems to be for some special routers, such as the Game setting? But if it is a dual-band routing, you may wish to open two wifi.
step one
If it is windows, enter the following sentence in cmd. You will find there is a default gateway column for defualt gateway, and then enter this IP address in the browser, and then you log in to your router.
ipconfig
Step two
Turn on the guest network , and put the original network account password on the guest network , so that it will not embarrass family members to re-enter wifi, and let your guests or other family members (whether play games or not) connect this. Set up the host network again and use it on your own computer. In this way, there is a difference between the primary and secondary networks. Xiaohu looked at the signals of the two wifi and found that the primary network would be better. In short, it is definitely faster not to share a frequency band with other devices. (PS: If it is a wifi that comes with this function, it is a dual-
band router , then it will not hurt the routers.) In addition, if the computer already supports the 5G band, you may wish to buy a 5G wifi router , which can speed up the network speed to a certain extent (Xiaohu I bought a 400kb download speed, the upload speed is not known).
Method 2 is here .
Method 3 update network card driver
This method is suitable for situations where the ping jump is very high, you can try to ping your ip continuously.
(The picture above is from rm -rf *)
step one
Check your ip and ping.
ipconfig
ping (your ip address) -t
Step two
Update the network card driver. You can use software such as Master Lu, or you can find your own device management in My Computer-Properties. Find your own network card in the network adapter, and then update.
Method 3 comes from the blogger rm -rf * 's experience of solving the problem of unstable ping value in playing games (difficult articles) .
In fact, Xiaohu didn't use the third method. After trying it myself, he found that his network card was the latest before, and he didn't jump outside the game. ( Do not laugh at my spicy chicken old network card )
Method 4 Upgrade broadband level and change operator
This is directly related to the maximum network speed, but whether it can effectively reduce the ping value is yet to be tested. The quality of the operator may also be related to such factors as signal towers, signal interference, etc. in each region.
result
In fact, Xiaohu used the first and second methods together. When I play another game, I take a few pictures and go to bed.
(I actually played two games ...)
