ネットワークパフォーマンステストツールiperfの一般的な操作

ソフトウェアの取得

バイナリバージョンを入手する

バイナリバージョンのダウンロードアドレス

自分でコンパイルする

ソースコードの取得

gitを使用してソースコードを確認します

git clone https://github.com/esnet/iperf.git

x86_64バージョンをコンパイルします

コンパイル環境の説明
システム:deepin V20
プラットフォーム:x86_64
gccバージョン:gcc version 8.3.0 (Uos 8.3.0.2-1+deepin)

コンパイル

cd iperf
./configure --prefix=/opt/App/iperf
make 
make install 

LoongsonMIPS64バージョンをクロスコンパイルします

コンパイル環境の説明
システム:deepin V20
プラットフォーム:x86_64
クロスコンパイラ:mips-loongson-gcc7.3-linux-gnu

コンパイル

cd iperf
export LD_LIBRARY_PATH=~/App/mips-loongson-gcc7.3-linux-gnu/2019.06-29/lib:$LD_LIBRARY_PATH
CC="~/App/mips-loongson-gcc7.3-linux-gnu/2019.06-29/bin/mips-linux-gnu-gcc" ./configure --prefix=/opt/mips/iperf --host=mips
make CROSS_COMPILE=mips-linux-gnu- -j4
make install 

操作を使用する

ドキュメントアドレスを使用する

パラメータ説明

Usage: iperf3 [-s|-c host] [options]
       iperf3 [-h|--help] [-v|--version]

Server or Client:
  -p, --port      #         server port to listen on/connect to
  -f, --format   [kmgtKMGT] format to report: Kbits, Mbits, Gbits, Tbits
  -i, --interval  #         seconds between periodic throughput reports
  -F, --file name           xmit/recv the specified file
  -A, --affinity n/n,m      set CPU affinity
  -B, --bind      <host>    bind to the interface associated with the address <host>
  -V, --verbose             more detailed output
  -J, --json                output in JSON format
  --logfile f               send output to a log file
  --forceflush              force flushing output at every interval
  -d, --debug               emit debugging output
  -v, --version             show version information and quit
  -h, --help                show this message and quit
Server specific:
  -s, --server              run in server mode
  -D, --daemon              run the server as a daemon
  -I, --pidfile file        write PID file
  -1, --one-off             handle one client connection then exit
  --rsa-private-key-path    path to the RSA private key used to decrypt
                            authentication credentials
  --authorized-users-path   path to the configuration file containing user
                            credentials
Client specific:
  -c, --client    <host>    run in client mode, connecting to <host>
  -u, --udp                 use UDP rather than TCP
  --connect-timeout #       timeout for control conn地址ection setup (ms)
  -b, --bitrate #[KMG][/#]  target bitrate in bits/sec (0 for unlimited)
                            (default 1 Mbit/sec for UDP, unlimited for TCP)
                            (optional slash and packet count for burst mode)
  --pacing-timer #[KMG]     set the timing for pacing, in microseconds (default 1000)
  -t, --time      #         time in seconds to transmit for (default 10 secs)
  -n, --bytes     #[KMG]    number of bytes to transmit (instead of -t)
  -k, --blockcount #[KMG]   number of blocks (packets) to transmit (instead of -t or -n)
  -l, --length    #[KMG]    length of buffer to read or write
                            (default 128 KB for TCP, dynamic or 1460 for UDP)
  --cport         <port>    bind to a specific client port (TCP and UDP, default: ephemeral port)
  -P, --parallel  #         number of parallel client streams to run
  -R, --reverse             run in reverse mode (server sends, client receives)
  --bidir                   run in bidirectional mode.
                            Client and server send and receive data.
  -w, --window    #[KMG]    set window size / socket buffer size
  -C, --congestion <algo>   set TCP congestion control algorithm (Linux and FreeBSD only)
  -M, --set-mss   #         set TCP/SCTP maximum segment size (MTU - 40 bytes)
  -N, --no-delay            set TCP/SCTP no delay, disabling Nagle's Algorithm
  -4, --version4            only use IPv4
  -6, --version6            only use IPv6
  -S, --tos N               set the IP type of service, 0-255.
                            The usual prefixes for octal and hex can be used,
                            i.e. 52, 064 and 0x34 all specify the same value.
  --dscp N or --dscp val    set the IP dscp value, either 0-63 or symbolic.
                            Numeric values can be specified in decimal,
                            octal and hex (see --tos above).
  -L, --flowlabel N         set the IPv6 flow label (only supported on Linux)
  -Z, --zerocopy            use a 'zero copy' method of sending data
  -O, --omit N              omit the first n seconds
  -T, --title str           prefix every output line with this string
  --extra-data str          data string to include in client and server JSON
  --get-server-output       get results from server
  --udp-counters-64bit      use 64-bit counters in UDP test packets
  --repeating-payload       use repeating pattern in payload, instead of
                            randomized payload (like in iperf2)
  --username                username for authentication
  --rsa-public-key-path     path to the RSA public key used to encrypt
                            authentication credentials

[KMG] indicates options that support a K/M/G suffix for kilo-, mega-, or giga-

iperf3 homepage at: https://software.es.net/iperf/
Report bugs to:     https://github.com/esnet/iperf

使用例

サーバーとして

iperf3 -s

クライアントとして

# 服务端地址192.168.0.1
iperf3 -c 192.168.0.1
# 测试tcp数据速率,测试时间100s
iperf3 -c 192.168.0.1 -t 100
# 测试udp丢包率,测试时间100s
iperf3 -c 192.168.0.1 -t 100 -u

おすすめ

転載: blog.csdn.net/macaiyun0629/article/details/106928850