2021 Meisai Latex Typesetting
¡Aún quedan dos semanas para jugar al juego de la belleza! ! ! Esta vez el equipo va a utilizar Latex para la composición tipográfica, después de todo, es más cómodo que Word ~
El siguiente es el MCM-ICM_2021_Summary descargado del sitio web oficial:
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% MCM/ICM LaTeX Template %%
%% 2021 MCM/ICM %%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\documentclass[12pt]{article}
\usepackage{geometry}
\geometry{left=1in,right=0.75in,top=1in,bottom=1in}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Replace ABCDEF in the next line with your chosen problem
% and replace 1111111 with your Team Control Number
\newcommand{\Problem}{ABCDEF}
\newcommand{\Team}{1111111}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\usepackage{newtxtext}
\usepackage{amsmath,amssymb,amsthm}
\usepackage{newtxmath} % must come after amsXXX
\usepackage[pdftex]{graphicx}
\usepackage{xcolor}
\usepackage{fancyhdr}
\lhead{Team \Team}
\rhead{}
\cfoot{}
\newtheorem{theorem}{Theorem}
\newtheorem{corollary}[theorem]{Corollary}
\newtheorem{lemma}[theorem]{Lemma}
\newtheorem{definition}{Definition}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\begin{document}
\graphicspath{
{.}} % Place your graphic files in the same directory as your main document
\DeclareGraphicsExtensions{.pdf, .jpg, .tif, .png}
\thispagestyle{empty}
\vspace*{-16ex}
\centerline{\begin{tabular}{*3{c}}
\parbox[t]{0.3\linewidth}{\begin{center}\textbf{Problem Chosen}\\ \Large \textcolor{red}{\Problem}\end{center}}
& \parbox[t]{0.3\linewidth}{\begin{center}\textbf{2021\\ MCM/ICM\\ Summary Sheet}\end{center}}
& \parbox[t]{0.3\linewidth}{\begin{center}\textbf{Team Control Number}\\ \Large \textcolor{red}{\Team}\end{center}} \\
\hline
\end{tabular}}
%%%%%%%%%%% Begin Summary %%%%%%%%%%%
% Enter your summary here replacing the (red) text
% Replace the text from here ...
\begin{center}
\textcolor{red}{%
Use this template to begin typing the first page (summary page) of your electronic report. This \newline
template uses a 12-point Times New Roman font. Submit your paper as an Adobe PDF \newline
electronic file (e.g. 1111111.pdf), typed in English, with a readable font of at least 12-point type. \\[2ex]
Do not include the name of your school, advisor, or team members on this or any page. \\[2ex]
Papers must be within the 25 page limit. \\[2ex]
Be sure to change the control number and problem choice above. \\
You may delete these instructions as you begin to type your report here. \\[2ex]
\textbf{Follow us @COMAPMath on Twitter or COMAPCHINAOFFICIAL on Weibo for the \newline
most up to date contest information.}
}
\end{center}
% to here
%%%%%%%%%%% End Summary %%%%%%%%%%%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\clearpage
\pagestyle{fancy}
% Uncomment the next line to generate a Table of Contents
%\tableofcontents
\newpage
\setcounter{page}{1}
\rhead{Page \thepage\ }
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
Begin your paper here
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\end{document}
\end
El pdf exportado después de que Latex se ejecuta:
Embellecimiento tipográfico:
Para prepararme de antemano, agregué algunos paquetes de macros y los compartí con ustedes:
1. Título y resumen
2. Entrada desordenada
3. Inserción de forma e imagen
4. Código de apéndice
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% MCM/ICM LaTeX Template %%
%% 2021 MCM/ICM %%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\documentclass[12pt]{article}
\usepackage{geometry}
\geometry{left=1in,right=0.75in,top=1in,bottom=1in}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Replace ABCDEF in the next line with your chosen problem
% and replace 1111111 with your Team Control Number
\newcommand{\Problem}{C}
\newcommand{\Team}{111111}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\usepackage{newtxtext}
\usepackage{amsmath,amssymb,amsthm}
\usepackage{newtxmath} % must come after amsXXX
\usepackage{graphicx}
\usepackage{xcolor}
\usepackage{fancyhdr}
\lhead{Team \Team}
\rhead{}
\cfoot{}
\newtheorem{theorem}{Theorem}
\newtheorem{corollary}[theorem]{Corollary}
\newtheorem{lemma}[theorem]{Lemma}
\newtheorem{definition}{Definition}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%================================
\usepackage{enumerate}%\item 需要
\usepackage{tabularx}% \table
\usepackage{booktabs}% \toprule
\usepackage{float}%图片浮动
\usepackage{graphicx}
\usepackage{bm}% reference
\usepackage{indentfirst}
\setlength{\parindent}{2em} %2em代表首行缩进两个字符
\usepackage{listings}%代码
%================================
\begin{document}
%\graphicspath{
{.}} % Place your graphic files in the same directory as your main document
%\DeclareGraphicsExtensions{.pdf, .jpg, .tif, .png}
\thispagestyle{empty}
\vspace*{-16ex}
\centerline{\begin{tabular}{*3{c}}
\parbox[t]{0.3\linewidth}{\begin{center}\textbf{Problem Chosen}\\ \Large \textcolor{red}{\Problem}\end{center}}
& \parbox[t]{0.3\linewidth}{\begin{center}\textbf{2021\\ MCM/ICM\\ Summary Sheet}\end{center}}
& \parbox[t]{0.3\linewidth}{\begin{center}\textbf{Team Control Number}\\ \Large \textcolor{red}{\Team}\end{center}} \\
\hline
\end{tabular}}
%==========================================
\renewcommand{\abstractname}{Summary}
%=====================================
%%%%%%%%%%% Begin Summary %%%%%%%%%%%
% Enter your summary here replacing the (red) text
% Replace the text from here ...
\begin{center}
\large\textbf{ { A System of Interstate Energy Cooperation Goals Based on Data Insight}}
\end{center}
\begin{abstract}
To address the above-mentioned challenge, we propose.... Then a XX model is proposed as ....
We propose ... based on .... Then we employ an XX model as .... The results show .... Lastly, we analyze ... to find ....
According to our empirical results, we propose some confident (sales) strategies and recommendations for .... We write a letter to (the marketing director of Sunshine Company) to summarize our analysis and results, together with our recommendations./ to assist with ..., we propose ...
Our framework shows a strong accuracy, robustness. It can be easily implemented to other data with our source codes.
\textbf{Keywords}: ext-Based Measure, Informative Text Selection, Reputation Quantification, Sales Strategy Formation
\end{abstract}
% to here
%%%%%%%%%%% End Summary %%%%%%%%%%%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\clearpage
\pagestyle{fancy}
% Uncomment the next line to generate a Table of Contents
\tableofcontents
\newpage
\setcounter{page}{1}
\rhead{Page \thepage\ }
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\section{Introduction}
\subsection{Problem Background}
To solve this problem, we need to construct the time-space based bathtub temperature model to
determine the optimal strategy which could achieve the following three objectives:
\begin{enumerate}[\quad\bf1.]
\item To keep the temperature \textbf{even} throughout the bathtub;
\item To keep the temperature as close as possible to the \textbf{initial} temperature;
\item \textbf{Not to waste} the water too much.
\end{enumerate}
\subsection{Our work}
\begin{enumerate}[\bf 1.]
\item work1.
\item work2.
\item work3.
\item work4.
\end{enumerate}
\section{Preparation of the Models}
\subsection{Assumptions}
To simplify our model and eliminate the complexity, we make the following main assumptions in this literature. All assumptions will be re-emphasized once they are used in the construction of our model:
\begin{enumerate}[\bfseries 1.]
\item e assume that the data given by official can fully solve the problem of the topic and do not need to obtain additional data as auxiliary information.
\item Assumption2.
\item Assumption3.
\end{enumerate}
\subsection{Notations}
In this work, we use the nomenclature in \textbf{Table \ref{Ntt}} in the model construction. Other nonefrequent-used symbols will be introduced once they are used.
\begin{table}[H]
\begin{center}
\caption{Notations}
\begin{tabular}{cl}
\toprule
\multicolumn{1}{m{3cm}}{\centering Symbol}
&\multicolumn{1}{m{8cm}}{\centering Definition}\\
\midrule
$I$&The Intensity of the Heat Source\\
$k$&The Material's Conductivity\\
$h$&The Heat Transfer Coefficient\\
$c$&The Heat Capacity of Water (=4200 J/(kg$\cdot^\circ$C))\\
$\rho$&The Density of Water (=10$^3$ kg/m$^3$)\\
\bottomrule
\end{tabular}\label{Ntt}
\end{center}
\end{table}
\section{Data Preprocessing}
\begin{figure}[!htbp]
\small
\centering
\includegraphics[width=7cm]{./pictures/11.png}
\includegraphics[width=7cm]{./pictures/13.png}
\caption{analysis of customers}\label{nt}
\end{figure}
\subsection{Default Value Processing}
\subsection{Abnormal Value Processing}
\subsection{Data Synthesis and Classification}
\section{Model Construction}
\textbf{Partial Differential Equation Method} (\textbf{PDE-Method}) \cite{10} is very uesful.
We use \textbf{PDE-Toolbox} in \textbf{MATLAB} software to solve .... \textbf{Figure \ref{jj}} shows the structure of our model, which can be
divided into two parts: \textbf{PDE Solving Model} and \textbf{Analysing Model}.
\begin{figure}[H]%\usepackage{float}
\small
\centering
\includegraphics[width=14cm]{./pictures/model.png}
\caption{The Structure of Model}\label{jj}
\end{figure}
\section{Targets and Action}
\section{Senitivity Analysis}\label{condition}
\section{ Strengths and Weaknesses}
\subsection{Strengths}
\begin{itemize}
\item Strength1.
\item Strength2.
\item Strength3.
\end{itemize}
\subsection{Weaknesses}
\begin{itemize}
\item Weakness1.
\item Weakness2.
\end{itemize}
\section{conclusion}
Different methods may show different ranks of effect according to the users' demand, the conditions
outside the bathtub and of the bathtub, and so on. However, according to our research in Section
\ref{condition}, these recommended methods are still useful under various conditions, if the details
(e.g. the temperature and the time of period) are properly adjusted. So the users can choose and
adjust the bath strategy based on the rules below:
\paragraph{Rule I}
\emph{High temperature and large flux can make the water attach the optimum temperature earlier,
meanwhile it may cause uneven temperature and waste of water.}
\paragraph{Rule II}
\emph{Evenness comes from continuous inflow with appropriate temperature, a little higher than the
optimum temperature in usual.}
\paragraph{Rule III}
\emph{The best strategy to have an excellent bath is to heat up the water before it cool down.}
\clearpage
\section*{Memo}\addcontentsline{toc}{section}{Memo}
\begin{flushleft}
Dear users:
\end{flushleft}
Thank you very much for choosing our bathtubs. Each piece of your support is our valuable treasure
which can encourage us to develop better bathtubs.We express our sincere thanks to you and your
family!
For this kind of bathtub, we have some suggestions for you:
\begin{enumerate}[\bf 1.]
\item You don't have to worry about the full-water condition, because when the bathtub is full
of water, the overflow drain can drain out the excess water.
\item With the consideration that you will have your special demands on the bath water, we give
you some suggestion through so that you can choose what you prefer
(or just freestyle you bath).
\end{enumerate}
\clearpage
\begin{thebibliography}{99}
\addcontentsline{toc}{section}{References} %引用部分标题（"Refenrence"）的重命名
\bibitem{5}Bailyn M., A Survey of Thermodynamics. \emph{American Institute of Physics}, 1997:23.
\bibitem{6}Louis C.B., Convective Heat Transfer (2nd ed.). \emph{Wiley-Interscience}, 2003:107.
\bibitem{7}Frank I., Theodore L.B., David D., Adrienne S.L., Fundamentals of Heat and Mass Transfer
(6th ed.). \emph{John Wiley \& Sons.}, 2007:260-261.
\bibitem{8}Marek R., Straub J., Analysis of the Evaporation Coeffcient and the Condensation
Coeffcient of Water. \emph{International Journal of Heat and Mass Transfer}, 2001(44):39-53.
\bibitem{9}Tao W.Q., Heat Transfer (4th ed.) (in Chinese). \emph{Higher Educational Press},
2006:2-5.
\bibitem{10}Lu J.A., Shang A., Xie J., Gu P., MATLAB-Solution of Partial Differential Equations (in
Chinese). \emph{Wuhan University Press}, 2001.
\end{thebibliography}
\clearpage
\section*{Appendices}\addcontentsline{toc}{section}{Appendices}
\noindent Appendix1：
%下面的是配置是可以写中文注释的python环境:
%\usepackage{listings}
%\usepackage{color}
\definecolor{dkgreen}{rgb}{0,0.6,0}
\definecolor{gray}{rgb}{0.5,0.5,0.5}
\definecolor{mauve}{rgb}{0.58,0,0.82}
\lstset{ frame=shadowbox, % shadowbox framed
rulesepcolor= \color{gray},%框的颜色
language=Python,
aboveskip=3mm,
belowskip=3mm,
showstringspaces=false,
columns=flexible,
basicstyle={\small\ttfamily},
numbers=left,%设置行号位置none不显示行号
%numberstyle=\tiny\courier, %设置行号大小
numberstyle=\tiny\color{gray},
keywordstyle=\color{blue},
commentstyle=\color{dkgreen},
stringstyle=\color{mauve},
breaklines=true,
breakatwhitespace=true,
escapeinside=``,%逃逸字符(1左面的键)，用于显示中文例如在代码中`中文...`
tabsize=4,
extendedchars=false %解决代码跨页时，章节标题，页眉等汉字不显示的问题
}
\begin{lstlisting}
from sklearn.svm import SVC
classifier = SVC(kernel = 'rbf',C=0.8, random_state = 0,class_weight={0:20,1:24})
#classifier = SVC(kernel = 'rbf',C=1.2, random_state = 0)
classifier.fit(X_train, y_train)
# Predicting the Test set results
y_pred = classifier.predict(X_test)
\end{lstlisting}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\end{document}
1. Título y resumen:
2. Tabla de contenido (el formato no está completo, puede modificarlo de acuerdo con el contenido de su propio artículo):
3. La inserción de tablas e imágenes estándar de tres líneas:
4. Referencias, Memo y código :
