一、AG7110功能描述
Algoltek AG7110芯片是数字视频接口（DVI）或高清多媒体接口（HDMI）或DisplayPort双模开关，最多可将3个DisplayPort或DVI或HDMI端口切换到单个显示接收器设备。带宽高达每个通道3.4Gbps，并支持深色技术。它的功率较低，在大多数应用中，操作不需要外部电源。AG7110可节省空间，有两种LQFP48和QFN48两种封装方式，并在0°C至+70°C温度范围内正常工作。Two, AG7110 electrical characteristics
• Single Supply 3.15V ~ 5.5V
Support AC and DC-coupled input
Support for HDMI, DVI and Display Port input
Compatible with HDMI 1.4b specification
Compatible dual-mode DisplayPort 1.1 standard version
Each TMDS channel throughput of up to 3.4Gbps (a total of 10.2 Gbps)
Pixel clock frequency up to 340MHz
Support 4K2K @ 30Hz resolution
• Supports Deep Color
To exclude external crystal embedded RC
Embedded 5V to 3.3V / 1.2V Regulator
In each of the high points integrated input signal 50 ohm termination resistor
Supports three LED indicators enable GPO ports
Support GPI selecting between the automatic mode or the MCU
(See Application Note AG7110)
Automatic HDMI plug-in detection
No external source device in the MCU, activates internal ports circuit
Support remote controller interface to an external MCU applications
And the implementation of power saving suspend mode
Automatic equalization embodiment designed to support different lengths of cable
Signal spreading embodiment designed to support long cable
Packaging and Packaging
LQFP-48 / QFN48 7X7mm packing size
Extended the commercial temperature range (0 ° C to + 70 ° C)
AG7110 ways to apply
projector
A / V receivers
Set-top boxes
Game consoles
TV / Monitor
Media center
PC / Laptop
Three, AG7110 design block diagram
Four, AG7110 pins division 
AG7110 LQFP48 pins division 
AG7110 QFN48 pin Division
五、AG7110管脚说明
六、AG7110特性
1.AG7110绝对值参数
2.AG7110 normal operating conditions
. 
3.AG7110 digital I / O specifications
Seven, AG7110 labeling and packaging 
AG7110 Packing