laser ranging experiment stm32 + VL53L0x
Connection:
the SCL - PA3
the SDA - PA2
VCC - 3.3V
GND - GND
GPIO1 - floating
XSHUT - PA5 (In fact, this is enabled, 0 off, 1 start)
For everyone to see the way I bought module
Assistant displays the contents of the serial port
when the measured distance
is too far away when measuring less than
Engineering punctual source is a modification of the routine atoms VL53L0x
1, remove the calibration process into a calibration reference
2, also removed the LCD and the LED module
3, as calibrated with reference to the places removed 24Cxx
Because I choose to precision laser measurement model errors are measured about 3cm in 20cm, so that the stage is
the stage of the project has been uploaded keil5 in CSDN on
(I also want to download other people's resources ah)
audited by later in the comments place, no points can leave the mailbox