Static little comprehensive experimental network (HCIP) of research

First, the experimental requirements

Here Insert Picture Description

Second, subnetting

192.168.1.0/24 a backbone of three by two routes:

骨干: 192.168.1.0/26          
R1  :  192.168.1.64/26
R2:    192.168.1.128/26
R3 :   192.168.1.192/26

Backbone: 192.168.1.0/26 three backbone:

192.168.1.0/30
192.168.1.4/30
192.168.1.8/30

R1: 192.168.1.64/26 not be divided belong to the same network segment

R2: 192.168.1.128/26 two loopback by bit:

192.168.1.128/27   
192.168.1.160/27

R3: 192.168.1.192/26 two loopback by bit:

192.168.1.192/27	
192.168.1.224/27

Third, configure all IP addresses

Here Insert Picture Description
Fourth, the Configuration 1 and 2, the HTTP server and the DNS server 3
V. configured static route
Rl:
Here Insert Picture Description
R2:
Here Insert Picture Description
R3:
Here Insert Picture Descriptionsix, the backup path setting floating static route
view can be seen that the routing table R3 and go 192.168.1.128/26 192.168.1.64/26 , 192.168.1.0/30 load balancing
Here Insert Picture Description
modify the priority value
Here Insert Picture Description
Here Insert Picture Description
Here Insert Picture Description
modified load balancing can be seen that the absence of
Here Insert Picture Description

Test: broken 1.9
Here Insert Picture Description

As can be seen the upper 1.5

Seven one-configure static NAT
Here Insert Picture Description
Here Insert Picture Description
Here Insert Picture Description

Ping outside the network within the test network
Here Insert Picture Description

Eight-many NAT

Here Insert Picture Description
Nine, R4telnet R3 R1 landing time

Maps on disposed R3
Here Insert Picture Description

Set a password on R1
Here Insert Picture Description
Here Insert Picture Description

test
Here Insert Picture Description

Published an original article · won praise 0 · Views 22

Guess you like

Origin blog.csdn.net/weixin_44258331/article/details/104344190