Win10 open method of operating a network wake-up function:
PS: require remote wake-up
1. First, we need to set the wake-up switch WOL function inside the motherboard BIOS, most motherboards will support wake
2. computer motherboards and network cards need to support Wake on LAN. General wireless network card is not supported by the onboard wired network card is generally possible.
3. network environment where the need to have public network IP. If it is ADSL dial-up, then, if the acquisition of a private network address, then it can apply to public IP network operators.
4. After you wake to use a router to ensure that the host has been energized with some motherboards goes off to start a host
First, set the motherboard BIOS
The BIOS options for WOL Wake on LAN is generally similar to these words wake on lan; resume on lan; power on PME; power on by PCI-E device; Power on by Onboard LAN, etc., you can set it to Enabled, this It is a necessary condition.
Second, set the network card driver
WOL related options set to open in the NIC driver. Find the network card device in Device Manager, right-select "Properties", then open the "Power Management" inside "Allow this device to wake the computer", and then find the "off Wake on LAN" in the "advanced" a column, "Magic Packet wake "Lane is set to" open. "
(If the drive is in English, you can update the driver)
Third, set up after the previous two, we can wake up WOL. WOL embodiment needs to know the physical address and the IP address of the NIC device (MAC).
1. Go to the router setup page: ip and port mapping settings
2. Find the local MAC address: Device Manager "click on this machine
3. Because the public network ip will be more variable, one disposed above the routing DDNS
Fourth, then you can remotely wake up
PS: First, set a good sleep or hibernation or shutdown computer (desktop, the power supply line to sticking)
Method a: external network use on another computer WakeOnLanGui
ps:下载地址链接: https://pan.baidu.com/s/186gaOBnsCpAnmdcnahuHIQ 提取码: 4s69
第一栏：机器MAC地址
第二栏：路由中开启的DDNS域名
第三栏：255.255.255.255
第五栏：之前虚拟服务器设置的端口
方法二：网页端唤醒
另一外网电脑直接浏览器打开https://www.depicus.com/wake-on-lan/woli
输入相关信息WEAKUP（注意：网页加载会比较慢，一定要等网页完全打开才能weakup）
方法三：手机小程序唤醒
识别下面的小程序即可使用（方法与上面2种方法一样）
PS: 远程桌面教程
