hardware
A WIFI, as the main route
single-wire port of a PC, as the host software routing system (used here # PC_LEDE # identification)
software
KoolShare LEDE firmware
https://firmware.koolshare.cn/
Micro PE kit
http://www.wepe.com.cn/
Roadkil's Disk Image
https://roadkil.net/download.php?FileID=409&ProgramID=12
Steps
1. The system is mounted to the U-PE.
2. LEDE DiskImage firmware and program copy to disk PE.
3. The system disk is inserted PE # PC_LEDE # and start.
3.1 Use tools to format the partition # PC_LEDE # disk.
DiskImage 3.2 firmware brush into the LEDE # PC_LEDE # disk.
4. Remove the PE system disk, into the restart # PC_LEDE # LEDE system.
Enter the command to modify the host IP address:
sudo nano /etc/config/network
5. Enter WIFI router, gateway IP LEDE configure the host.
6. Access and configure the host IP LEDE
7. "Cool soft" Adding extensions.
8. Restart LEDE WIFI routers and routing software.
--- Finish---