UV Communications Team


After the car is no lack of love "riders" in the ranks of amateur radio enthusiasts, to obtain operating permits and sets the class A personal radio, you can install the car radio in the car, using his radio call sign and the other HAM Communications (application A class exam and apply for operating permits to set up personal radio stations please contact your local authorities).

Lovers lane travel team organization, ranging from twenty-three car, as many as dozens of vehicles. If the vehicle is more, the team will pull into a long line on the highway, stretches for several kilometers, very domineering!

If the truck and trailer vehicles installed car radio, then set the maximum transmission power of 25W power specified in Class A operation certificate, then no problem in Communications within a radius of 5km. With the station give your team an added security, more of a pleasure. In addition to other vehicles in the convoy head the rear of the car also installed car radio, easy to listen to traffic information and truck tail car released.

If the team is only thirty-five car travel, using the handheld radio is also available. But more fleet vehicles, pull farther than the distance between vehicles, handheld radio because of low power, long-distance use will be somewhat insufficient.

In addition, the use of handheld radio must be equipped with on-board charger, in order to avoid the situation in the road appears a dead battery. Dual-band dual car radio to receive more appropriate Communications team, in addition to listening to the team frequency, you can also listen to the local frequency.

Driving Amateur Radio Communications Communications to comply with norms, Communications terminology should be simple and clear. We summarize the 10 teams driving precautions for enthusiasts reference.

Team Driving 10 Note
1. In general, only the first car fleet and each group / tail can launch the car, listening to other vehicles, non-special circumstances, please do not launch.

2. The truck and trailer truck drivers heavier tasks, should choose more experienced or more familiar road vehicle HAM head or tail as truck drivers. 3. Before starting team, the team should be in all frequency radio set, if necessary frequency can be locked. Shall comply with the requirements set frequency of the local amateur radio management departments within the specified emission amateur bands. It suggested the use of VHF band frequency (144 ~ 148MHz), compared to the UHF band (430 ~ 440MHz), VHF band spread farther in the open environment.

4. In the team before the start of each vehicle shall affix radio call sign and license plate number of the car radio, front and rear make the car a glance. Please call the car radio call sign at the time of Communications and inform the license plate number. At the time of departure, all vehicles in turn report the call letters and license plate number.

5. Before starting team, the first car should be organized for all vehicles will fill the oil in the process of moving, it is timely to ask the first car of each vehicle fuel, the fuel unified as possible.

6. fleet vehicles when there is need to go beyond and should be reported on the radio in his radio call sign, inform themselves about to overtake all vehicles, only to wait beyond the truck and the front and rear of the vehicle to confirm.

7. truck turning in / through the intersection, especially in sharp turns, should slow, please do not call, the first car can report back to the vehicle rear. In the end the car through the corners or through the intersection to inform all fleet vehicles passed.

8. If the traffic lights or road intersection occurs, failed to pass behind the vehicle, so the team distance, the vehicle should be promptly informed of the end of the first car and car head case Communications front of the vehicle and the rear of the vehicle should slow down or stop to understand the situation, waiting behind the vehicle to follow.

9. Be sure to observe the road conditions when Communications by radio, to ensure road safety.

10. road ride, you can use the appropriate radio Communications, avoid prolonged occupation of frequencies. In case of emergency situations, to immediately stop the current QSO, so that the frequency to listen to the radio call about the emergency situation and respond in a timely manner. When the team travel Communications common example
1. Here BH1AAA (trucks), front left turn / roadside parking the car note.
2. Here is BH1AAA (trucks), pedestrians through the intersection ahead. Please note that the car, the deceleration avoidance.
3. Here is BH1AAA (trucks), in front of the case, the rapid deceleration.
4. Here BH1ZZZ (tail car), the entire fleet of vehicles through the intersection of all / traffic lights.
5. Here BH1ZZZ (tail car), in front of the car 5 at the intersection waiting for traffic lights red, please BH1AAA (trucks) deceleration. 6. Here BH1AAA (trucks), the intersection ahead appropriately reduced speed, after all by BH1ZZZ (tail car) reports about.
7. Here is BH1CCC, I will overtake, please BH1AAA (trucks) allowed.
8. Here BH1AAA (trucks), allowing BH1CCC overtaking, please note that each vehicle.
9. Here BH1ZZZ (tail car), front right BH1YYY overtaking, please note that each car.
10. Here is BH1AAA (trucks), the opposite direction of the vehicle, each car note. 
11. Here is BH1CCC, my car brakes have a problem, you need to stop and check, please BH1AAA slow down or stop.
12. Here is BH1AAA (trucks), BH1CCC, BH1YYY pull over other vehicles to move on.
13. emergency, here is BH1AAA (trucks). (At this point all the team radio silence, waiting BH1AAA Ads) convoy driving, safety comes first, the purpose of Radio Communications for the team indicating the direction of travel, road conditions, report an emergency, the team travels to master the dynamic, and to ensure that all vehicles personnel safety.
Published 99 original articles · won praise 17 · views 220 000 +

Guess you like

Origin blog.csdn.net/xztjhs/article/details/51828570