I recently needed to use the sd card making Huawei atlas startup program, did not support the card reader usb3.0, looking for a better plan, without success, this article is the following program is currently the only one available to find.
Remarks:
(1) Use Vmware15 later, or encounter inexplicable black screen, crash, will not start problems
(2) If you need sd card virtual machine server connections outside the network, you can refer to this article external sd card network connected via usb virtual machine server mode, connected by routing the way forward
The following is the text
Original link: https://www.cnblogs.com/wybliw/p/11404593.html
VMWare virtual machine version V15
Ubuntu version 16.04LTS
1. General U disk to switch between physical and virtual machines
Open the Ubuntu virtual machine, U disk into the laptop, wait until windows system identification U disk, lower right corner of the virtual machine software U disk icon will appear, as shown:
The right icon, select "connection (disconnect the Host)", as shown:
After the confirmation pop-up options, select OK. At this point the U disk cut into the Ubuntu virtual machine, as shown:
If U is USB3.0 disk, the virtual machine needs to be set to the USB controller is compatible with USB3.0 mode, as shown:
This is a common U-switching mode in the physical and virtual machines.
2. notebook-board SD card to switch between physical and virtual machines.
Note: This operation requires a running VMWare virtual machine as an administrator, followed by interpretation.
Be sure to insert the SD card, and then open VMWare software, or see the SD card when you add a hard disk.
SD card slot on the notebook, as shown:
After the notebook insert SD, as is the interface on the motherboard, and the USB connector into some difference U disk, as shown:
Therefore, the virtual machine can not see the bottom right corner of the SD icon, as shown:
At this point let SD card access virtual machine how to set up?
Then you need to add a physical hard way, the SD card access virtual machine.
Open Ubuntu virtual machine settings, select Add, select the hard disk, the next step, as shown:
Keep the default, the next step, as shown:
Select a physical disk, the next step, as shown:
选择 physicalDrive 1（若不确定，请弹出SD卡，physicalDrive 1消失，则说明physicalDrive 1是SD卡，这一步一定要确认好，physicalDrive 0是笔记本硬盘，误操作可能导致硬盘数据丢失。），使用整个磁盘，下一步，如图：
设置硬盘文件的保存位置，完成，确定，如图：
若出现下面的错误提示，请以管理员的身份打开VMWare虚拟机软件，按照上述步骤重新走一遍即可。
设置完成后，若Ubuntu虚拟机时开机状态，请重新启动Ubuntu系统。
SD卡设备接入Ubuntu系统，如图：
此时就可以在Ubuntu系统中格式化SD卡，烧写Uboot启动等操作了。
== end ==
