1, as administrator to start Fiddler, then select "Options" secondary menu under "Tools". Interface is shown below:
2. Select the "Connections" tab in the "Options" dialog box, select the "Allow remote computers to connect" check box. (Port number can be modified, but it must be a native unused port), and to this end Fiddler completed the configuration, the next step is to configure the mobile phone side. Interface is shown below:
3, ip access address of this machine.
1) Win + R to start the Run dialog box, type cmd, and click OK to enter the command line interface. Interface is shown below:
2) in the command line window, type "ipconfig / all" or "ipconfig" you can check the ip address of the machine, I use the ip address that figure below the red box. Interface is shown below:
4, IOS system settings
1) Open the phone, click on the "Settings" icon to enter the setup screen, then click on the "Wireless LAN" project into the wireless LAN interface, and then click the exclamation mark after the WiFi network connections, network today details page, there is a proxy configuration in the bottom of the page, click in, then select manual, then the following will be more than three, ip address of the server is just a query, the port is above that port (default 8888), and then tap store to complete the mobile phone side configuration.
2) end of the Andrews ios Similarly, because there is no Android machine, particularly your own research settings.
This completes the configuration of the mobile phone side, then you can not open the APP needs to listen to listen, and how to analyze specific online tutorials very many.
