| 
I. Product Overview This card is the enterprise-level card can be used for the data center, security field data acquisition and processing. PCI Express standard full-height board for common server, workstation. Two interfaces Introduction 
Third, the hardware specifications
| structure size |
PCI Express standard full-height panel, suitable for ordinary servers, workstations, high-grade veneer with standard whole article, conveniently fixed to the client PC / Server |
| FPGA models |
XCKU040-FFVA1156-2I (2 grade, technical grade) |
| RAM |
4 DDR4 particles, the total capacity of 16Gbit; 1200Mhz (2400MT / S) |
| Boot Flash |
128Mbits * 2, the total capacity of 256Mbit |
| SATA interface |
2, a single interface rate  high support Sata 3.0 Note: the source and does not include routines sata |
| SFP + interfaces |
4, a single interface rate high to support 10.3125Gbps |
| QSFP + interfaces |
A dedicated high-speed transmission is provided to the user, the total bandwidth of 40Gbps |
| Programmable clock |
QSFP / SFP + / SATA interfaces using programmable clock corresponding to the clock |
| PCIE interface |
X8, support Gen1.0 / Gen1.1 / Gen2.0 / Gen3.0, each lane high speed 8.0 Gbps, in line with PCI Express Gen3.0 specification, X8 model, the theoretical bandwidth up to 64 Gbps, the bandwidth 5000MByte under test in Windows7 / s |
| EEPROM |
Capacity 8Kbit |
| User DIP switch |
4bit |
| Users button |
4bit |
| LED lights |
3bit |
| Serial ports |
USB serial form, number one, high support 115200 baud rate |
| Expansion port connector |
The connector lead 43 pairs of differential pairs, a total of 86 signal lines |
| Board power supply |
12V (± 10%), using an external power source; PCIe slot may be selected supply and typically consumes 15W |
| Temperature sensing chip |
温度传感器1：读取板卡周围空气温度 温度传感器2：读取FPGA芯片内部温度-目前市面上极少有公开的监控芯片温度的解决方案，我司将这部分功能例程源码提供，提高客户产品运行监控机制 （产品化必备规格，所有电脑PC机及服务器上运行的PCIe卡必须能监控周围温度） |
| 详细说明 |
提供本单板详细说明文档，包含个电路和FPGA对接管脚说明，方便客户进行二次开发（不包含本单板整版的原理图）。如果客户需要原理图，可参考Xilinx官方资料，光盘中已经统一整理。 |
四、软件指标
| 软件例程（例程涉及到代码的，均是源码提供） |
| 序号 |
例程名称 |
测试接口 |
| 1 |
如果需要装配到电脑主机上，档条如何安装 |
|
| 2 |
USB串口驱动及相应串口软件使用 |
|
| 3 |
如何通过Xilinx USB加载线连接单板 |
|
| 4 |
单板拿到通电后验证 |
|
| 5 |
自检程序 |
LED灯 |
| EEPROM |
| 拨码开关SW5 |
| 按键SW0,SW1,SW2,SW3 |
| 单板ID |
| 温度传感器1:单板周围温度 |
| 温度传感器2:读取FPGA芯片温度 |
| DDR4 |
| 6 |
SFP+接口ibert测试 |
测试万兆接口 |
| 7 |
QSFP接口ibert测试 |
测试QSFP接口 |
| 8 |
万兆SFP+10GE_AMC测试 |
测试万兆接口，和PC万兆网卡通信 |
| 9 |
PCIE Gen3 X8 XDMA测试 |
测试PCIE3.0接口，和PC通信 （win7，win10） |
| 10 |
如何使用DDR4 IP |
测试DDR4接口 |
| 11 |
如何烧写Flash文件 |
|
| 12 |
如何通过JTAG获取芯片温度 |
|
五、产品套件包含
| 产品套件包含 |
| 1 |
MO02板卡 |
| 2 |
Mini usb 串口线缆 |
| 3 |
12V∕5A 电源 |
| 4 |
产品光盘 （网盘形式提供） |
| 5 |
全高 档条（杜绝板卡在主板上摇晃） |
| 6 |
12V供电风扇+散热器 |
|