First explain, screenshots too large, resulting in page text in the picture under the normal ratio of see ^! ^, The web page can be enlarged.
First, the preparatory work
1. Create a new integrated library project
2. Add schematic and PCB library files package
3. Engineering prepared as shown below
Second, create packaging and PCB footprint Schematic
1. Draw a random two-pin package Schematic
2. Draw a corresponding PCB package
3. Set properties schematic package
4. Schematic package to add more encapsulated PCB (ease of use when selecting different types of packages, such as resistance capacitance and the like 0402,0603,0805 selected according to the actual package model)
(1) Schematic drawing of a capacitor package
(2) 0402 and 0603 Videos PCB footprint
(3) is a schematic view of a package to add the corresponding PCB footprint and set the default encapsulation
Third, compiled integrated library
1. Right project, select compile the project
2. Compile generated .IntLib file in the project directory Project Outputs for <project name> folder
3. The integrated library into the library can be used
Fourth, supplement
Integrated library can contain many of the components of the package and PCB schematic package comes as libraries, where only drew a capacitor, resistor inductor can add the future or the like, and then to the integrated library designated "None source device "(or make a MCU integrated library, including MPC5675K TC297 and the like).
