1, the user needs
- In order not to change the current network topology environment, the user intends to ACG Layer 2 devices are deployed transparently to the network environment.
2, topology environment
3, configuration roadmap
ACG configuration roadmap: - Create a bridge interface
- The uplink physical interface included in the bridge interface (with respect to the bridge interface may be unworthy address)
ACG configuration steps:
Open ACG browser (the default is based https), click on the "interface" options are as follows:
Click right "network Interface" option ------> click "New"
in the "name" from a number here, the left vertical line interface included ACG connected to the bridge mouth, click on the "Submit" as shown in FIG. :
explanation: check the ping test here because of convenience to do the test (in the ACG can also ping in the menu "system management" -----> "system maintenance" -----> "system diagnostic tool" ------> ping)
configuration of submitting as shown below:
Finally menu "Internet management" -------> "policy configuration" -> "IPv4 strategy," to create an allow all traffic policy, the configuration as shown below:
S5500A配置
[S5500A]int vlan 1
[S5500A-Vlan-interface1]ip add 192.168.1.1 24
[S5500A-Vlan-interface1]
[S5500A-Vlan-interface1]quit
S5500B配置
[S5500B]int vlan 1
[S5500B-Vlan-interface1]ip add 192.168.1.2 24
Ping测试：
[S5500A]ping 192.168.1.2
PING 192.168.1.2: 56 data bytes, press CTRL_C to break
Reply from 192.168.1.2: bytes=56 Sequence=1 ttl=255 time=45 ms
Reply from 192.168.1.2: bytes=56 Sequence=2 ttl=255 time=30 ms
Reply from 192.168.1.2: bytes=56 Sequence=3 ttl=255 time=30 ms
Reply from 192.168.1.2: bytes=56 Sequence=4 ttl=255 time=30 ms
Reply from 192.168.1.2: bytes=56 Sequence=5 ttl=255 time=15 ms
192.168.1.2 of ping statistics --- ---
. 5 Packet (S) Transmitted
. 5 Packet (S) Received
0.00% Packet Loss
round-TRIP min / AVG / MS max = 15/30/45
. 4, Notes
- ipv4 strategy ACG inside need to put through, or is unable to ping the.