1. Network Topology
2. SW1 configuration:
[SWl] BATCH VLAN 20 is 10
[SWl] interface of GigabitEthernet 0/0/1
[SWl-the GigabitEthernet0 / 0 /. 1] Access Port Link-type
[SWl-the GigabitEthernet0 / 0 /. 1] default VLAN Port 10
[ SWl] interface of GigabitEthernet 0/0/2
[SWl-the GigabitEthernet0 / 0/2] Port Access link-type
[SWl-the GigabitEthernet0 / 0/2] Port default VLAN 20 is
to create a link interface polymerization:
[SWl] LACP priority. 1
[ SWl] interface the Eth-Trunk. 1
[SWl-the Eth-Trunk1] MODE LACP-static
[SWl-the Eth-Trunk1] max Active-linknumber 2
[SWl-the Eth-Trunk1] Port Link-type Trunk
[SWl-the Eth-Trunk1] Port trunk allow-pass vlan 10 20
ports to the polymerization:
[SWl] interface of GigabitEthernet 0/0/22
[SWl-the GigabitEthernet0 / 0/22 is] Eth-Trunk. 1
[SWl] interface of GigabitEthernet 0/0/23
[SWl-the GigabitEthernet0 / 0/23 is] Eth-Trunk. 1
[SWl] interface of GigabitEthernet 0/0/24
[SWl-the GigabitEthernet0 / 0/24]. 1 Eth-Trunk
3. SW3 are arranged :
the following :( the rest of the configuration without configuration SW1)
[SW1] LACP priority. 1
[SW1-the Eth-Trunk1] max Active 2-linknumber
4. View Configuration
