1, download and install the Keil C51 (keil C51V9.56 including cracking tools Download: https://sn9.us/file/22176102-413243314),Keil installation path to choose in C: \ Keil (better not be another path , or to set up in Silicon's IDE. some keil default installation folder name version is Keil_v5, put the folder name changed keil )
2, Silicon download the IDE: Third Party Download: https://sn9.us/file/22176102-413243367 (ad-free speed )
Download the official website address: https://www.silabs.com/documents/login/software/mcu_ide.exe (outside the slow speed of network )
3, the download is complete, open the IDE, open the project, the pop-up window, select "No", open the project.
4, configure the plug-in path → keil compile the project. (Keil installation path if the first step is not mentioned in the C: \ Keil, here you need to set the path)
5, hardwired connection, four lines are: VDD, CLK, DAT, GND. Debug external power supply when needed, IDE does not supply power. Si4010-bit OTP chip, if you have been burned, you can not Debug, need to take an empty chip Debug.
6, download the program and start debug.
Connection failed Explanation:
If the following prompt (prompt the wrong version), in fact, is not a version of the problem, but the circuit wiring is incorrect or no external power supply, or the emergence of a bad chip.
