Foreword
Official has given most of the examples I just did what explanation transplant
This section look at how to migrate DHCP official website of the program
First, first clear: W5500 microcontroller and communication through SPI, all data is transmitted and received via SPI,
So, to get the official source only need to modify the SPI section diagram according to their principles
The change pin configuration
Note: The reason why we wrote it, is because
Note: we now need to change this name
Because there is no need ..... I used SPI1 if they want to change, then you can feel this way
In fact the program is to allow the official to put your own SPI put here
If you want to change the name, to amend its own ..........
Compile
Then go download
Let the computer serial port and communication STM32
Communication selection position can be seen in FIG consistent with the principles and PCB schematic ,,
Short BOOT0 and 3.3V
Reset bit microcontroller
And removing the short BOOT0 3.3V, the reset Microcontroller
Internet access lines, connected to the router
Note Kazakhstan, is connected
Open the serial debugging assistant
Reset under STM32
Epilogue
In fact, that is, change it according to their own SPI port it ......