Huawei's basic commands to explain

FIG follows:

a Huawei save and exchange routing configuration file replacement:

PC7 connection route R1 through the console port configuration.
Del delete
Dir View
Save 2019.10.24.cfg save the configuration file named 2019.10.24.cfg
the Startup saved-configuration file to replace the Configuration 2019.10.24.cfg.
Reboot restart
Cd enter
Pwd view
Move Move files
Mkdir create a folder
Copy to copy files

Second, the basic configuration:
interface configuration Undo negotiation auto off auto-negotiation
Speed 100 disposed interfaces 100M
Duplex Full manually open a full duplex
Save to save

System-view The system view
Quit to exit the
Interface ge 0/0/0 interface view
Display View Command
Display this Show
Display current-configuration View the current configuration (Show running-config)
Display the Brief view ip interface IP
Run the display saved-View the Configuration # save the router configuration
undo shut # open this interface

Ctrl + z back to the user view
Ctrl + c to stop the current command run
Clock datetime Time
Console 0

Third, the serial configuration and password sign telnet:
Configure telnet remote login:
<Rl> System Configuration-View to enter the
[R1] sysname R1 renamed Rl
interface 0/0/0 et enters ET0 / 0/0 port
ip address 192.160.4.1 255.255. 255.0 configure the IP
interface 0/0/1 et
IP address 255.255.255.0 12.1.1.1
User-interface vty 0 4 vty 0 4 entering port
set authentication password simple huawei cleartext password provided HUAWEI
sET authentication password cipher cipher text password provided HUAWEI HUAWEI
User Privilege level 3 # set the user level to management level # ( "0" for the visit level, "1" for monitor level, "2" for the configuration level, "3--15" for the management level)

Press R2 with a good view of the IP. Then telnet into R1:
<R2> telnet 12.1.1.1
password: HUAWEI
<R1> Brief view the display IP IP interface
displays into R1 as shown below

配置串口密码：
<R1>system-view  
user-interface console 0 进入串口0

set authentication password simple huawei plain text password HUAWEI
the SET authentication password the cipher keyword HUAWEI set cipher text password HUAWEI
the User Privilege Level 3 # Set the user level to management level # ( "0" for the visit level, "1" for monitor level, "2" configuration level, "3--15" for the management level)

创建用户和建立3A认证：
Aaa 进入本地3A数据库

Local-user huawei password cipher huawei create user ciphertext huawei to huawei password
Local-user huawei privilege level 3 setting user huawei to level 3
is set to vty 0 under User-interface vty 0 4 User
Authentication-mode aaa setting mode to AAA