VMware installation, centos installation
Install CentOS on VMware
Step 1: Open VMware, click Create a new virtual machine
Step 2: Select Typical, click Next. The following interface, and then select the third option: install the operating system later, click Next
Step 3: Client installed Linux operating system choice, to choose according to their version of Linux to download the image file, here we choose CentOS 64 bits. Then click Next
Step 4: name to the virtual machine, the virtual machine and selecting the location of installation, preferably a non-Chinese free address spaces. Then click Next
Step 5: By default, disk size 20 GB is sufficient. Then click Next
Step 6: Click the Finish button
After you click done, we will find that we just CentOS virtual machines created in VMware main interface
Step 7: Click on Edit virtual machine settings
Pop up as follows:
Step 8: the hardware virtual machine's configuration
①, first adjust the memory size, in general, the memory can not be less than the minimum 628 m, maximum can not exceed half of the real physical machine memory. We can select the default memory size is enough 1024M
②, secondly we can adjust to the processor, hard drive size can also be adjusted, but here we have chosen to default on the line, jump directly to CD / DVD (IDE) option, we choose the downloaded CentOS image file, then click OK
Then after the above steps, we have to configure the virtual machine setup is complete, the next step to install the virtual machine.
Step 9: VMware to the main interface, we choose to install CentOS virtual machine, click the virtual machine is turned on
Step 10: After entering the Welcome screen, select the first option: Install or upgrade an existing system, then Enter.
Note: We enter the installation interface, the mouse, you need to press Ctrl + Alt to make the mouse to return to their home system.
Several other options mean:
Step 11: Ask whether we need to check the disc, we press the right arrow to select the skip option (that is, without detection), Enter
Step 12: Click next
Step 13: Select the Chinese Simplified, click Next
第 14 步：键盘选择 美国英语式，然后点击下一步
第 15 步：选择 基本存储设备，点击下一步
第 16 步：选择第一个，是 忽略所有数据
第 17 步：给主机命名
第 18 步：选择时区亚洲/伤害，去掉勾选使用UTC时间。然后点击 下一步
第 19 步：给根用户设置密码，然后点击 下一步。
注意：如果密码设置的过于简单，系统会弹出您的密码不够安全，但是你可以选择无论如何都使用，然后继续
第 20 步：选择进行哪种类型的安装，我们选择最后一个 创建自定义布局
第 21 步：给硬盘分区，如下界面，我们点击 创建
为了便于后面的操作，我们这里选择手动分区，顺便给大家普及一下Linux分区的知识：
Linux 系统分区：
必须分区：
①、根分区 /
②、交换分区 swap (可以理解为虚拟内存，当内存不够时，可以临时使用 swap 分区，内存的两倍，不超过 2GB)
推荐分区：
③、启动分区 boot （保存系统启动时的数据，一般不用太大，200 M足够，防止根分区写满文件之后，系统起不来）
④、home 分区 ，保存用户的信息
我们在上一步之后选择标准分区，点击创建
第一步：创建 boot 分区，大小为 200 m
第二步：给 swap 分区，大小为 2000 M
（同上，点击创建，文件系统类型选swap）
第三步：给 home 分区，大小为 5000 M
第四步：给 根目录 分区，大小为剩余所用空间
那么我们分区完成，点击 下一步：
第 22 步：格式化硬盘，选择格式化
第 23 步：选择将修改写入磁盘，点击下一步
第 24步：默认，点击下一步
第 25 步：选择安装类型
初学者如果想要图形化界面可以选择 前面两个，但是基本上后面的操作建议都用命令行的形式来学习更好，这里我们建议选择 Basic Server （纯字符界面）点击下一步，然后等待安装完成
You can also use a custom [now] -> [Next] to set up the application software you want to install
Step 26: After installation is complete, we can choose to reboot, enter the username and password to log Linux system we installed
Step 27: Enter the user name and password to log on Linux systems
