On cable
Cable crystal head there are two configurations, one is directly connected to the interconnection method of a cross interconnection method.
Is cross-line approach: using a 568 A standard, using a 568 B standard.
Parallel (straight) line of approach is: two with the same 568 A standard or 568 B standard. (Typically used are 568 B parallel (straight) line of approach)
568 A Standard: white and green blue and white orange and blue orange white brown brown
A cross-connection
1-3,2-6 cross connection. Although there are eight four pairs of twisted-pair wire, but in fact the network uses only four of which, i.e. 1, 2 and 3, pin 6 of the first crystal, which respectively function as sending and receiving the role of the signal. This crossover cable core wire arrangement rule is:
One end of the cable the other end of the first pin 3 feet connected, at one end of the cable 6 feet 2 feet of the other end is connected, correspond to the other foot. This arrangement is made out commonly known as "cross-line, for example, when the core end of the wire line sequential order of left to right: white and green, green, orange and white, blue, white, blue, orange, white brown, brown , the other end of the core sequence is from left to right should be followed: white orange, orange, green, white, blue, white, blue, green, white brown, brown as shown below:
Second, the method directly connected
2.1 568 A standard
2.2, 568 B standard
2.3,100M connection
"100M connection." This is one of the most popular cable production rules. The so-called connection 100M, 100M means that it can meet the bandwidth of communication speed. Although it is one to one connection, but each foot color is fixed. specifically is: