Simulink simulation --- clark transformation, anti-clark transformation

Disclaimer: This article is a blogger original article, follow the CC 4.0 BY-SA copyright agreement, reproduced, please attach the original source link and this statement.

This link: https://blog.csdn.net/qlexcel/article/details/98475411

A, clark clark transformation and anti-transformation

1, change the formula:

We clark transformation, the Ia, Ib, Ic converted into Iα, Iβ:

Change the formula is:

2, model

Add clark conversion subsystem, the model is as follows :( "Simulink" - "User-Defined Function" - "Fcn" added at function block)

Adding an anti-clark transformation subsystem model is as follows:

Signal source and the oscilloscope was added:

Source attributes are:

Set the simulation stop time is 0.2 to start the simulation:

3 can be seen that input signal, a phase difference of 120 degrees. After transformed clark, two output signals of the signal phase difference of 90 degrees. Clark inverse transform and then after the signal changes back difference of 120 degrees three signals. And manual match.