Andrews Virtual Machine Download:
https://zh.osdn.net/projects/android-x86/downloads/67834/android-x86-7.1-rc2.iso/
can also select other versions (× 86 to 32bit, × 86_64 is 64bit)
New Virtual Machine
FIG Once created:
in the created new virtual machine [right] → [Set], [the system] is replaced by [] [pointing device PS / 2 mouse], as shown:
[display], the [memory size] is set to maximum, [and] enable 3D acceleration.
You can set the [Network] in the "connection" to bridge mode [], select the name of the interface is the real host connected to the network, you can view the host's network settings. This operation is to allow the host to connect to a virtual machine, can not be provided, does not affect the virtual machine is running.
Virtual Machine 4 network connecting the different ways you can refer to quickly understand 4 network connection virtual machine
add disc in the store:
then start the virtual machine.
Virtual Machine System Installation
Select the last item, [Enter] to start the installation.
Select [] to create a new partition, as follows:
[NO] Select
interface selection below [New]
is selected from [Primary]
default size, direct [ENTER]:
Select [Bootable] as the boot partition, [Enter], as shown below
Then select [write], fill [yes], [ENTER]
and then [Quit] to return to the installation interface, select the first item sda1, [ENTER]
partition ext4 format selected here [], the official recommendation ntfs, but the actual ntfs test selection system will not boot.
[Yes] choose
to start formatting
prompted to install GRUB, boot, i.e. when the interface system startup, [Yes] choose
whether to allow read, select "Yes" in the directory / system
after installation, when prompted to reboot when you the system can be restarted safely. Before restarting, can be turned off first, and then the [Setup VitualBox -> stored "] check whether Android iso mirror is connected to the virtual machine, if so, remove it; if not the virtual disk is removed, or after restarting ISO is loaded into the system installation interface.
Run Android
In the GRUB boot screen, there are options for debug mode and normal mode. Choose the first start [Android-x86 7.1-rc2]
If all goes well, you will see the following interface:
select the language [Simplified Chinese]
Click [Start]
Click [] with the new settings
but at this point, I met can not connect to the network problem, you can connect to a network of friends can continue to fill in information when prompted, fill can enter the "main interface"; encountered the same problem or want to skip the step of setting a personal friend below can do the following:
Return before you can begin to select the interface language ( "Return" button interface "small triangle" below), then click on the top left of the interface, upper right, lower right, lower left four positions (Click ABCD), as shown:
then will Tip skip setting information, select the main application screen, two ways to be chosen at random. Here is the first choice Launcher3] [
enter into the main interface.
