FIG speedy bee vtx-dtx Chinese explained that transmission, recording, LED settings.

 speedy bee vtx-dtx 图传

 

Frequency settings

The factory default setting is in the locked mode, the red LED flashes

Only 25mW available. You can long press to switch to the unlocked mode

Button for 10 seconds, the red LED is solid.

note:

You unlock it before VTX, strongly we recommend that you look at

Your country rules and regulations relating to the avoidance of frequency / regions

Fines or confiscation of your device.

Button Function Switch

· Press CH;

· Press 2 seconds to BAND;

· Long press 5 seconds to enter POWER;

· Press 10 seconds

 Unlock / lock mode.

 

LED status

. 1 blue CH LED

CH1 ON,CH2~8 OFF;

. 6 red LED with

Represent a 1-6 band

Red LED flashes - lockdown mode

Red LED continuous light - unlocked mode

 

 

1 orange Power LED

Orange LED flashes quickly -   PIT mode

Orange LED close 25mW

Orange LED blinking slowly -   200mW

Orange LED stays on 600 yards

 

 If VTX is connected to the Controller the Flight (BetaFlight 3.3 or later) the IRC

Tramp agreement, VTX by Flight Controller and Control

Frequency will be changed to F1 5740, the button on the VTX will not

More reaction.

* If you need 200 / 600mW and all 48 channels have been unlocked, a little longer

Press the button on the VTX 10 seconds, until the red LED stays on.

 

LED status

DVR green LED is lit continuously - in standby mode

Green LED blinks slowly (per 1 time) - Under the recording mode

Green LED flashes quickly (per 2) -   Micro SD full or failure

is recognized

Format Micro SD card

*在待机模式下,长按按钮5秒钟,SD卡将

格式化并开始录制。

 

开始录制

*开机时自动录制(应插入Micro SD卡

在第一)。

*在待机模式下,短按按钮开始录制。

*在待机模式下,长按按钮约5秒钟,直到

绿色LED熄灭,SD卡将被格式化并开始录制

 

停止录制

*在录制模式下,短按按钮,文件将被保存和DVR

将转为待机模式。

 

警告

*录音文件将每5分钟按段自动保存

Micro SD卡已满时,录制停止。

* 1小时录制需要大约3G容量。因此,8G Micro SD卡可以

记录约2.5小时。

*关闭电源后,DVR不会自动保存文件。所以请停止

关机前录音。否则,您将错过最后一次录音。

 

 

Guess you like

Origin www.cnblogs.com/xujiahui/p/11408558.html