Paper
# How to set paper
paper setting, 5 http://www.c-lodop.com/demolist/PrintSample5.html reference sample
some of the priority http://blog.sina.com.cn/s/blog_721e77e50100wto6 paper. html
# Does not support custom paper
paper setting, 5 http://www.c-lodop.com/demolist/PrintSample5.html reference sample
with pdf or xps virtual printer test (sample test available 5), if the virtual printer output the paper is correct, is not a real printer, the printer may not support the custom paper.
Select the real printer, check the paper size in the status bar at the bottom of the print preview, some of the printer does not support custom paper.
Paper provided, with reference to examples 5 http://www.c-lodop.com/demolist/PrintSample5.html
paper some priority http://blog.sina.com.cn/s/blog_721e77e50100wto6.html
with pdf or xps virtual printer test (sample test available 5), if the virtual printer output is the correct paper, the printer is not true, it may be the printer does not support custom paper.
Select the real printer, check the paper size in the status bar at the bottom of the print preview, some of the printer does not support custom paper.
Continuous printing paper, paper straight out
as (blog post :) paper, no paper can easily be mistaken for a high degree, but there are printers print height restrictions, not the kind of small ticket, so a certain height to hit a big deal, and this is set the paper height.
If it is not the kind of small ticket, you need to set a specific height of the paper, printer paper for maximum height is limited. Batch printing, pages of the task, the task to strike a balance between the number of pages and the reference sample 26http: //www.c-lodop.com/demolist/PrintSample26.html
You need to set specific paper height, automatically paging, with reference to http://www.c-lodop.com/faq/pp17.html
3. Continuous printout sheets, increasing the cumulative offset:
setting paper output and the actual paper size are different, if it does not do the same with paper mock-ups, the number of output after a certain task, find the need to manually adjust the feed when there is a deviation to correct the position.
This continuous paper, a set size, the continuous printing paper.
The printer should print a continuous mode, the customer does not have prior continuous printing, the printer with single-page mode, adjusted to a continuous printing mode printing continuously
Printer
# How to set the printer
to select the printer, reference sample 5,7http: //www.c-lodop.com/LodopDemo.html
printer priority, reference http://blog.sina.com.cn/s/blog_721e77e50100wto6.html
# Get less than one printer
to select the printer, reference examples 5, 7
http://www.c-lodop.com/demolist/PrintSample5.html
http://www.c-lodop.com/demolist/PrintSample7.html
printer Some of the priority http://blog.sina.com.cn/s/blog_721e77e50100wto6.html
as test cases 5 and 7, if you can get to the printer, access to the printer is installed windows operating system printer list. If you can not get re-install the driver or try to re-share.
# Get Default Printer
reference sample http://www.c-lodop.com/demolist/PrintSample7.html. 7
-1 default printer especially
Get the number of the printer, printer name, printer specifies the reference sample. 7
http://www.c-lodop.com/demolist/PrintSample7.html
-1 default printer especially
# Set windows default printer
settings windows default printer Reference Sample 5 http://www.c-lodop.com/demolist/PrintSample5.html
* Specify another printer to print preview in a printer, the printer is not directly specify the
direct sample under test 7 to try to specify the printer. http://www.c-lodop.com/demolist/PrintSample7.html
Select the printer, reference http://www.c-lodop.com/demolist/PrintSample7.html
with sample 7 to obtain the printer name, if the name wrong, will go to other printer in accordance with the priority.
Some priority http://blog.sina.com.cn/s/blog_721e77e50100wto6.html printer
code specifies the printer will go according to the specified printer.
The printer in question is set to windows default printer, try specify -1, -1 refers specifically to the default printer.
Select the printer, the next test sample to try, try reinstalling the printer driver.
** select a printer can not be previewed, it may be 10, other printers can
not judge, should and printers.
When a small number of prints if you can preview the contents or the next split, preview pages and more pay would be some tasks, too many do not recommend preview, the proposed direct printing, to strike a balance between the tasks and the number of pages, reference sample 26 http://www.c-lodop.com/demolist/PrintSample26.html
If the task can be split in content, you can print in multiple task try, such as a printed page.
No other printer problems, or to change the printer.
Try a content, whether the printer can be previewed.
If the test can not preview the printer more than 10 pages, split the job, every time you print 10 try.
There is no good way to preview or not, direct printing.
Copies
# Set the number of copies
printer copies reference sample 7 http://www.c-lodop.com/demolist/PrintSample7.html
Set # uncollated output parts (Related Bowen: LODOP setting the number of copies, and whether collated output )
LODOP.SET_PRINT_MODE ( "PRINT_NOCOLLATE",. 1); // set to non-collated, 1-12-23-3
Print Direction
# Set print direction
transverse longitudinal, reference http://blog.sina.com.cn/s/blog_721e77e5010143gh.html
set the printing direction, with reference to examples 5 http://www.c-lodop.com/demolist/PrintSample5 .html
transverse print, preview vertical, the reference sample E http://www.c-lodop.com/demolist/PrintSample16.html 16
Duplex
# How to set duplex printing
two-sided printing reference http://www.c-lodop.com/demolist/PrintSample6.html
need to actually test the printer, the printer may not have support duplex printing.
# A double-sided printer can not control
if the actual test statement can not control, it can only be set up on the printer.
You can set the printer's settings. In the list of printer devices in the windows, select the printer, there may have advanced.
Specific printer can consult customer service.
Refresh the page, clean up under the browser cache, try to refresh the list of printers, whether the impact of cache.
Lodop may not control the printer's two-sided, there is no good way to limit the printer.
Try to modify only try to set the printer itself. If the printer's own settings are also invalid, printer customer service under consultation, there is no other way to force set up double-sided, lodop no other method of control.