Ural 1250 Sea Burial solution to a problem

table of Contents

Ural 1250 Sea Burial solution to a problem

Ural 1250 Sea Burial solution to a problem

The meaning of problems

Given an (n \ times m \) \ map \ (. \) Water, \ (\ # \) of land, water is outside the map (map surrounded by water). Water eight connectivity, Lu four Unicom. Unicom known as sea water, China Unicom land called island. There may be domestic island, the island may have the sea. Given \ (x, y \) seek containing \ ((x, y) \ ) (guarantee \ ((x, y) \ ) How many island water) sea inside.

And data input range

第一行包含\ (m, n, y, x (1 \ n, m \ 500.1 the \ X \ n, 1 \ the y \ m) \)

The following several acts of a \ (n \ times m \) map

answer

Consider BFS or DFS (hereinafter referred to as BFS)

From \ ((x, y) \ ) BFS, find contains \ ((x, y) \ ) of the sea.
Map from the outside (water) BFS, find out containing \ ((x, y) \ ) the outer part of the sea.
After you do the first two steps, you can know contain \ ((x, y) \ ) of the inside part of the sea, contains a number \ ((x, y) \ ) How much of the island to the sea inside part have.

Tip: you can make the program easy to use binary. Kee Lu is \ (1 \) , the island is \ (2 \) . We need to set the value \ (X \) , the current value \ (Y \) , is determined simply \ ((x \ & y) \) is greater than \ (0 \) can. When Step 1 \ (the X-2 = \) , when Step 2 \ (the X-3 = \) (think about it, why, the answer is finally revealed), when Step 3 \ (the X-1 = \) .

program

// #pragma GCC optimize(2)
// #pragma G++ optimize(2)
// #pragma comment(linker,"/STACK:102400000,102400000")

// #include <bits/stdc++.h>
#include <map>
#include <set>
#include <list>
#include <array>
#include <cfenv>
#include <cmath>
#include <ctime>
#include <deque>
#include <mutex>
#include <queue>
#include <ratio>
#include <regex>
#include <stack>
#include <tuple>
#include <atomic>
#include <bitset>
#include <cctype>
#include <cerrno>
#include <cfloat>
#include <chrono>
#include <cstdio>
#include <cwchar>
#include <future>
#include <limits>
#include <locale>
#include <memory>
#include <random>
#include <string>
#include <thread>
#include <vector>
#include <cassert>
#include <climits>
#include <clocale>
#include <complex>
#include <csetjmp>
#include <csignal>
#include <cstdarg>
#include <cstddef>
#include <cstdint>
#include <cstdlib>
#include <cstring>
#include <ctgmath>
#include <cwctype>
#include <fstream>
#include <iomanip>
#include <numeric>
#include <sstream>
#include <ccomplex>
#include <cstdbool>
#include <iostream>
#include <typeinfo>
#include <valarray>
#include <algorithm>
#include <cinttypes>
#include <cstdalign>
#include <stdexcept>
#include <typeindex>
#include <functional>
#include <forward_list>
#include <system_error>
#include <unordered_map>
#include <unordered_set>
#include <scoped_allocator>
#include <condition_variable>
// #include <conio.h>
// #include <windows.h>
using namespace std;

typedef long long LL;
typedef unsigned int ui;
typedef unsigned long long ull;
typedef float fl;
typedef double ld;
typedef long double LD;
typedef pair<int,int> pii;
#if (WIN32) || (WIN64) || (__WIN32) || (__WIN64) || (_WIN32) || (_WIN64) || (WINDOWS)
#define lld "%I64d"
#define llu "%I64u"
#else
#define lld "%lld"
#define llu "%llu"
#endif
#define ui(n) ((unsigned int)(n))
#define LL(n) ((long long)(n))
#define ull(n) ((unsigned long long)(n))
#define fl(n) ((float)(n))
#define ld(n) ((double)(n))
#define LD(n) ((long double)(n))
#define char(n) ((char)(n))
#define Bool(n) ((bool)(n))
#define fixpoint(n) fixed<<setprecision(n)

const int INF=1061109567;
const int NINF=-1044266559;
const LL LINF=4557430888798830399;
const ld eps=1e-15;
#define MOD (1000000007)
#define PI (3.1415926535897932384626433832795028841971)

/*
#define MB_LEN_MAX 5
#define SHRT_MIN (-32768)
#define SHRT_MAX 32767
#define USHRT_MAX 0xffffU
#define INT_MIN (-2147483647 - 1)
#define INT_MAX 2147483647
#define UINT_MAX 0xffffffffU
#define LONG_MIN (-2147483647L - 1)
#define LONG_MAX 2147483647L
#define ULONG_MAX 0xffffffffUL
#define LLONG_MAX 9223372036854775807ll
#define LLONG_MIN (-9223372036854775807ll - 1)
#define ULLONG_MAX 0xffffffffffffffffull
*/

#define MP make_pair
#define MT make_tuple
#define All(a) (a).begin(),(a).end()
#define pall(a) (a).rbegin(),(a).rend()
#define log2(x) log(x)/log(2)
#define Log(x,y) log(x)/log(y)
#define SZ(a) ((int)(a).size())
#define rep(i,n) for(int i=0;i<((int)(n));i++)
#define rep1(i,n) for(int i=1;i<=((int)(n));i++)
#define repa(i,a,n) for(int i=((int)(a));i<((int)(n));i++)
#define repa1(i,a,n) for(int i=((int)(a));i<=((int)(n));i++)
#define repd(i,n) for(int i=((int)(n))-1;i>=0;i--)
#define repd1(i,n) for(int i=((int)(n));i>=1;i--)
#define repda(i,n,a) for(int i=((int)(n));i>((int)(a));i--)
#define repda1(i,n,a) for(int i=((int)(n));i>=((int)(a));i--)
#define FOR(i,a,n,step) for(int i=((int)(a));i<((int)(n));i+=((int)(step)))
#define repv(itr,v) for(__typeof((v).begin()) itr=(v).begin();itr!=(v).end();itr++)
#define repV(i,v) for(auto i:v)
#define repE(i,v) for(auto &i:v)
#define MS(x,y) memset(x,y,sizeof(x))
#define MC(x) MS(x,0)
#define MINF(x) MS(x,63)
#define MCP(x,y) memcpy(x,y,sizeof(y))
#define sqr(x) ((x)*(x))
#define UN(v) sort(All(v)),v.erase(unique(All(v)),v.end())
#define filein(x) freopen(x,"r",stdin)
#define fileout(x) freopen(x,"w",stdout)
#define fileio(x)\
    freopen(x".in","r",stdin);\
    freopen(x".out","w",stdout)
#define filein2(filename,name) ifstream name(filename,ios::in)
#define fileout2(filename,name) ofstream name(filename,ios::out)
#define file(filename,name) fstream name(filename,ios::in|ios::out)
#define Pause system("pause")
#define Cls system("cls")
#define fs first
#define sc second
#define PC(x) putchar(x)
#define GC(x) x=getchar()
#define Endl PC('\n')
#define SF scanf
#define PF printf

inline int Read()
{
    int X=0,w=0;char ch=0;while(!isdigit(ch)){w|=ch=='-';ch=getchar();}while(isdigit(ch))X=(X<<3)+(X<<1)+(ch^48),ch=getchar();
    return w?-X:X;
}
inline void Write(int x){if(x<0)putchar('-'),x=-x;if(x>9)Write(x/10);putchar(x%10+'0');}

inline LL powmod(LL a,LL b){LL RES=1;a%=MOD;assert(b>=0);for(;b;b>>=1){if(b&1)RES=RES*a%MOD;a=a*a%MOD;}return RES%MOD;}
inline LL gcdll(LL a,LL b){return b?gcdll(b,a%b):a;}
const int dx[]={0,1,0,-1,1,-1,-1,1};
const int dy[]={1,0,-1,0,-1,-1,1,1};
/************************************************************Begin************************************************************/
const int maxn=510;

int n,m,X,Y,s[maxn][maxn],ans; // '#'=>1(01) '.'=>2(10)
bool vis[maxn][maxn];

inline void bfs(int sx,int sy,int status)
{
    vis[sx][sy]=1;
    queue<pair<int,int> > q;q.push({sx,sy});

    while(!q.empty())
    {
        int x=q.front().fs,y=q.front().sc;q.pop();

        rep(i,8)
        {
            if(s[x][y]==1&&i>3) break;

            int cx=x+dx[i],cy=y+dy[i];
            if(cx>0&&cx<=n&&cy>0&&cy<=m&&!vis[cx][cy]&&(s[cx][cy]&status))
            {
                vis[cx][cy]=1;
                q.push({cx,cy});
            }
        }
    }
}

int main()
{
    cin>>m>>n>>Y>>X;
    rep1(i,n) rep1(j,m)
    {
        char c;cin>>c;
        s[i][j]=(c=='#'?1:2);
    }
    
    // step 1
    bfs(X,Y,2);
    
    // step 2
    rep1(i,n)
    {
        bfs(i,0,3);
        bfs(i,m+1,3);
    }
    rep1(j,m)
    {
        bfs(0,j,3);
        bfs(n+1,j,3);
    }
    
    //step 3
    rep1(i,n) rep1(j,m) if(!vis[i][j]&&s[i][j]==1)
    {
        ans++;
        bfs(i,j,1);
    }

    cout<<ans;

    return 0;
}
/*************************************************************End**************************************************************/

DFS (very similar to BFS)

// #pragma GCC optimize(2)
// #pragma G++ optimize(2)
// #pragma comment(linker,"/STACK:102400000,102400000")

// #include <bits/stdc++.h>
#include <map>
#include <set>
#include <list>
#include <array>
#include <cfenv>
#include <cmath>
#include <ctime>
#include <deque>
#include <mutex>
#include <queue>
#include <ratio>
#include <regex>
#include <stack>
#include <tuple>
#include <atomic>
#include <bitset>
#include <cctype>
#include <cerrno>
#include <cfloat>
#include <chrono>
#include <cstdio>
#include <cwchar>
#include <future>
#include <limits>
#include <locale>
#include <memory>
#include <random>
#include <string>
#include <thread>
#include <vector>
#include <cassert>
#include <climits>
#include <clocale>
#include <complex>
#include <csetjmp>
#include <csignal>
#include <cstdarg>
#include <cstddef>
#include <cstdint>
#include <cstdlib>
#include <cstring>
#include <ctgmath>
#include <cwctype>
#include <fstream>
#include <iomanip>
#include <numeric>
#include <sstream>
#include <ccomplex>
#include <cstdbool>
#include <iostream>
#include <typeinfo>
#include <valarray>
#include <algorithm>
#include <cinttypes>
#include <cstdalign>
#include <stdexcept>
#include <typeindex>
#include <functional>
#include <forward_list>
#include <system_error>
#include <unordered_map>
#include <unordered_set>
#include <scoped_allocator>
#include <condition_variable>
// #include <conio.h>
// #include <windows.h>
using namespace std;

typedef long long LL;
typedef unsigned int ui;
typedef unsigned long long ull;
typedef float fl;
typedef double ld;
typedef long double LD;
typedef pair<int,int> pii;
#if (WIN32) || (WIN64) || (__WIN32) || (__WIN64) || (_WIN32) || (_WIN64) || (WINDOWS)
#define lld "%I64d"
#define llu "%I64u"
#else
#define lld "%lld"
#define llu "%llu"
#endif
#define ui(n) ((unsigned int)(n))
#define LL(n) ((long long)(n))
#define ull(n) ((unsigned long long)(n))
#define fl(n) ((float)(n))
#define ld(n) ((double)(n))
#define LD(n) ((long double)(n))
#define char(n) ((char)(n))
#define Bool(n) ((bool)(n))
#define fixpoint(n) fixed<<setprecision(n)

const int INF=1061109567;
const int NINF=-1044266559;
const LL LINF=4557430888798830399;
const ld eps=1e-15;
#define MOD (1000000007)
#define PI (3.1415926535897932384626433832795028841971)

/*
#define MB_LEN_MAX 5
#define SHRT_MIN (-32768)
#define SHRT_MAX 32767
#define USHRT_MAX 0xffffU
#define INT_MIN (-2147483647 - 1)
#define INT_MAX 2147483647
#define UINT_MAX 0xffffffffU
#define LONG_MIN (-2147483647L - 1)
#define LONG_MAX 2147483647L
#define ULONG_MAX 0xffffffffUL
#define LLONG_MAX 9223372036854775807ll
#define LLONG_MIN (-9223372036854775807ll - 1)
#define ULLONG_MAX 0xffffffffffffffffull
*/

#define MP make_pair
#define MT make_tuple
#define All(a) (a).begin(),(a).end()
#define pall(a) (a).rbegin(),(a).rend()
#define log2(x) log(x)/log(2)
#define Log(x,y) log(x)/log(y)
#define SZ(a) ((int)(a).size())
#define rep(i,n) for(int i=0;i<((int)(n));i++)
#define rep1(i,n) for(int i=1;i<=((int)(n));i++)
#define repa(i,a,n) for(int i=((int)(a));i<((int)(n));i++)
#define repa1(i,a,n) for(int i=((int)(a));i<=((int)(n));i++)
#define repd(i,n) for(int i=((int)(n))-1;i>=0;i--)
#define repd1(i,n) for(int i=((int)(n));i>=1;i--)
#define repda(i,n,a) for(int i=((int)(n));i>((int)(a));i--)
#define repda1(i,n,a) for(int i=((int)(n));i>=((int)(a));i--)
#define FOR(i,a,n,step) for(int i=((int)(a));i<((int)(n));i+=((int)(step)))
#define repv(itr,v) for(__typeof((v).begin()) itr=(v).begin();itr!=(v).end();itr++)
#define repV(i,v) for(auto i:v)
#define repE(i,v) for(auto &i:v)
#define MS(x,y) memset(x,y,sizeof(x))
#define MC(x) MS(x,0)
#define MINF(x) MS(x,63)
#define MCP(x,y) memcpy(x,y,sizeof(y))
#define sqr(x) ((x)*(x))
#define UN(v) sort(All(v)),v.erase(unique(All(v)),v.end())
#define filein(x) freopen(x,"r",stdin)
#define fileout(x) freopen(x,"w",stdout)
#define fileio(x)\
    freopen(x".in","r",stdin);\
    freopen(x".out","w",stdout)
#define filein2(filename,name) ifstream name(filename,ios::in)
#define fileout2(filename,name) ofstream name(filename,ios::out)
#define file(filename,name) fstream name(filename,ios::in|ios::out)
#define Pause system("pause")
#define Cls system("cls")
#define fs first
#define sc second
#define PC(x) putchar(x)
#define GC(x) x=getchar()
#define Endl PC('\n')
#define SF scanf
#define PF printf

inline int Read()
{
    int X=0,w=0;char ch=0;while(!isdigit(ch)){w|=ch=='-';ch=getchar();}while(isdigit(ch))X=(X<<3)+(X<<1)+(ch^48),ch=getchar();
    return w?-X:X;
}
inline void Write(int x){if(x<0)putchar('-'),x=-x;if(x>9)Write(x/10);putchar(x%10+'0');}

inline LL powmod(LL a,LL b){LL RES=1;a%=MOD;assert(b>=0);for(;b;b>>=1){if(b&1)RES=RES*a%MOD;a=a*a%MOD;}return RES%MOD;}
inline LL gcdll(LL a,LL b){return b?gcdll(b,a%b):a;}
const int dx[]={0,1,0,-1,1,-1,-1,1};
const int dy[]={1,0,-1,0,-1,-1,1,1};
/************************************************************Begin************************************************************/
const int maxn=510;

int n,m,X,Y,s[maxn][maxn],ans; // '#'=>1(01) '.'=>2(10)
bool vis[maxn][maxn];

inline void dfs(int x,int y,int status)
{
    vis[x][y]=1;

    rep(i,8)
    {
        if(s[x][y]==1&&i>3) break;

        int cx=x+dx[i],cy=y+dy[i];
        if(cx>0&&cx<=n&&cy>0&&cy<=m&&!vis[cx][cy]&&(s[cx][cy]&status)) dfs(cx,cy,status);
    }
}

int main()
{
    cin>>m>>n>>Y>>X;
    rep1(i,n) rep1(j,m)
    {
        char c;cin>>c;
        s[i][j]=(c=='#'?1:2);
    }
    
    // step 1
    dfs(X,Y,2);
    
    // step 2
    rep1(i,n)
    {
        dfs(i,0,3);
        dfs(i,m+1,3);
    }
    rep1(j,m)
    {
        dfs(0,j,3);
        dfs(n+1,j,3);
    }
    
    //step 3
    rep1(i,n) rep1(j,m) if(!vis[i][j]&&s[i][j]==1)
    {
        ans++;
        dfs(i,j,1);
    }

    cout<<ans;

    return 0;
}
/*************************************************************End**************************************************************/

Tip's answer: Step 2 is a need to identify comprising \ ((x, y) \ ) the outer part of the sea, while the outer portion regardless sea, \ (X =. 3 \) i.e. \ (x = (11) _2 \) , so \ (1 \ 3 & \) and \ (2 \ 3 & \) greater than \ (0 \) a.

Ural 1250 Sea Burial solution to a problem

Ural 1250 Sea Burial solution to a problem

The meaning of problems

And data input range

answer

program

Guess you like